We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat USB 2.0 Type-A male to male cable with 90-degree angled connectors, 10 to 200cm length

xiwai

xiwai Up Angled USB 2.0 Type-A Male to Type-A Male 90 Degree Flat Slim FPC Cable 10-200cm

SKU CH-4200-FE593

Flat slim FPC cable with a 90-degree up-angled USB 2.0 Type-A male connector at each end, transferring data at 480 Mbps for printers, scanners, disks or FPV cameras.

  • Connector TypeUSB A to USB A
  • ColorBlack

Cable Length 6"

  • 6"
  • 1.5 Feet
  • 3.3 Feet
  • 6.6 Feet

Struck-through versions exist but are not stocked here.

  • Up-angled 90° connector fits tight spaces
  • USB 2.0 data at 480 Mbps links drives, scanners, printers
  • Flat slim FPC cable stays flexible for gimbal and camera rigs
  • Length options from 10 cm to 200 cm suit any layout
  • DIY assembly lets you customise the finished cable

Cable purpose and fit

This xiwai cable connects two USB Type-A ports using a flat, soft FPC ribbon. It is built for tight spaces such as FPV gimbals, cameras, scanners, printers or external hard disks where a standard round cable will not route cleanly. The 90-degree up-angled plug keeps the connection low-profile against the device. Buyers who need a right-angle or down-angled orientation, or who require USB 3.0 speeds, should look elsewhere.

Thermals noise and power

The cable carries only USB 2.0 data at 480Mbps and draws power within the normal port budget. No active electronics are present, so it adds no audible noise and no measurable heat during normal use. The slim FPC construction stays flexible across the 10 to 200cm length range without stiffening.

Assembly and usage notes

The cable and connectors arrive separately; you must assemble them yourself using the supplied guide. Once assembled, the flat ribbon lies flat against frames or chassis, reducing snag risk on moving gimbal arms. The 90-degree up angle clears adjacent ports on dense boards. No driver or software is required — the link is passive and works with any host that supports USB 2.0 Type-A.

Highlights

  • Up-angled 90° connector fits tight spaces
  • USB 2.0 data at 480 Mbps links drives, scanners, printers
  • Flat slim FPC cable stays flexible for gimbal and camera rigs
  • Length options from 10 cm to 200 cm suit any layout
  • DIY assembly lets you customise the finished cable

Specifications

Connector TypeUSB A to USB A
ColorBlack

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the up-angled USB 2.0 Type-A connectors, and which step do people get wrong?

The cable and connectors ship separately; you must assemble them yourself by following the included guide. The common mistake is skipping the guide and forcing the flat FPC into the housing the wrong way round.

What maintenance or replacement will this flat FPC cable need later?

The flat FPC construction has no user-serviceable parts; if the 90-degree bend or connectors wear from repeated flexing, the entire cable assembly is replaced.

What limit appears first under sustained use of this USB 2.0 link?

The 480 Mbps USB 2.0 data ceiling is the first bottleneck; sustained transfers cannot exceed that rate regardless of cable length or host performance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.