Xeno Energy
Xeno XL-060F 3.6V AA 2.4Ah Lithium Battery with Tabs 24-Pack
A 24-pack of 3.6V AA lithium batteries with tabs, each delivering 2.4Ah capacity and a 10+ year shelf life for long-term deployments
- Battery TypeAA
- 6 V operating voltage stays stable through most of the cell life
- 4 Ah capacity ranks among the highest available for AA lithium
- 10-year shelf life with under 1 % annual self-discharge
- Wide -55 °C to +85 °C range handles extreme environments
- 24 tabs-terminated cells ready for direct PCB soldering
24-Pack Xeno XL-060F Lithium AA Cells
This 24-pack supplies 3.6 V lithium AA cells rated at 2.4 Ah each. They are built for long-life industrial and utility metering equipment that demands stable voltage over years of service. The tab termination allows direct soldering to circuit boards without a holder.
Check voltage and current limits before installing
Your device must accept a 3.6 V primary lithium cell and draw no more than 60 mA continuously or 120 mA in pulses. Do not mix these with other chemistries or models in series. The tabs require soldering; verify your assembly process can complete each joint in a few seconds.
Thermals noise and power in normal use
Operating range spans -55 °C to +85 °C with a low self-discharge rate below one percent per year at 20 °C. The non-pressurised inorganic electrolyte is non-flammable at ambient temperature. Store in a clean, cool, dry, ventilated area not exceeding 30 °C.
Highlights
- 6 V operating voltage stays stable through most of the cell life
- 4 Ah capacity ranks among the highest available for AA lithium
- 10-year shelf life with under 1 % annual self-discharge
- Wide -55 °C to +85 °C range handles extreme environments
- 24 tabs-terminated cells ready for direct PCB soldering
Specifications
| Battery Type | AA |
|---|
Questions about this item
What comes in the 24-pack and is any extra hardware needed for installation?
The pack contains 24 Xeno XL-060F AA lithium cells, each with solder tabs on both ends. No additional hardware is included; the tabs are designed for direct PCB soldering.
How do I decide between the 2.4 Ah capacity and other lithium AA options?
The 2.4 Ah rating is among the highest nominal capacities available in this form factor, suited for long-life, low-drain applications such as utility meters or alarms.
What does the 60 mA continuous current limit mean for a real device?
The cell is rated for a maximum of 60 mA continuous draw with 120 mA pulse capability, so it powers low-current electronics reliably but cannot support high-drain loads like motors or bright LEDs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



