We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three cylindrical AA lithium cells with metal tabs on both ends

Xeno Energy

Xeno XL-060F 3.6V AA 2.4Ah Lithium Battery 3-Pack with Tabs

SKU CH-GSNY-K5RER

Supplies 3.6 volts and 2.4 Ah capacity per cell in a three-pack of AA lithium batteries with solder tabs for direct PCB mounting

  • Battery TypeAA
  • 6 V high operating voltage stays stable through most of the battery life
  • 4 Ah capacity ranks among the highest available for AA lithium cells
  • Shelf life exceeds 10 years with less than 1 % loss per year at 20 °C
  • Operates reliably from –55 °C to +85 °C in humid conditions
  • Non-rechargeable primary cell with tabs on both ends for direct soldering

Three-pack lithium AA cells

This pack contains three Xeno XL-060F AA batteries, each delivering 3.6 V and 2.4 Ah from a non-rechargeable lithium chemistry. They are built for devices that need a single-cell primary supply with a very long shelf life. Solder tabs on both ends allow direct board mounting without a holder. The cells weigh 17.1 g each and are rated for an operating range of -55 °C to +85 °C.

Capacity and continuous limits

At 2.4 Ah the cells suit low-drain applications such as utility metering, data loggers, memory backup and remote sensors where current stays near the 60 mA continuous rating. Pulse loads up to 120 mA are supported for brief intervals. Self-discharge is below 1 % per year at 20 °C, so the pack remains viable after a decade in storage. Sustained draws above the continuous figure will deplete capacity rapidly and are not recommended.

Replaces common 3.6 V AA lithium types

The XL-060F is a direct cross-reference for Tadiran TL-2100, TL-4903, TL-5104, TL-5903, Saft LS-14500 and SL-760, Toshiba ER6V and ER6LV, and Maxell E cells. It is not a drop-in for 1.5 V alkaline or rechargeable AA formats, so equipment designed for those voltages will not operate correctly. The jump is worthwhile only when the host circuit specifies a 3.6 V primary lithium cell with tab terminations.

Highlights

  • 6 V high operating voltage stays stable through most of the battery life
  • 4 Ah capacity ranks among the highest available for AA lithium cells
  • Shelf life exceeds 10 years with less than 1 % loss per year at 20 °C
  • Operates reliably from –55 °C to +85 °C in humid conditions
  • Non-rechargeable primary cell with tabs on both ends for direct soldering

Specifications

Battery TypeAA

Questions about this item

Will the 3.6V Xeno XL-060F work in my older device that took a 3.6V Tadiran TL-2100?

Yes. The XL-060F is listed as compatible with the Tadiran TL-2100 and other 3.6V AA lithium models such as the Saft LS-14500 and Toshiba ER6V.

How can I verify the 2.4Ah cells are healthy after soldering the tabs?

Measure open-circuit voltage; a fresh cell reads close to 3.6V. Under a light load the voltage should stay stable, confirming the low self-discharge rate.

Does the 3-pack include any solder, flux or a holder, or must I buy those separately?

The pack contains only three Xeno XL-060F batteries with pre-welded tabs. Solder, flux, holders or any mounting hardware are not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.