We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small cylindrical lithium cell with white label and attached connector wires

Xeno Energy

Xeno Energy XLP-050F 3.6V 1/2 AA 1.2Ah Lithium Battery with Connector

SKU CH-P4ZA-CHK1Y

3.6 V 1/2 AA lithium cell with connector delivering 1.2 Ah for long-life sensor and tag power

  • Battery Type1/2 AA Lithium
  • High operating voltage remains stable for most of the application lifetime
  • Shelf life exceeds 10 years with under 1% capacity loss after one year at +20°C
  • Operates reliably from -55°C to +85°C for extreme environments
  • Non-flammable inorganic electrolyte eliminates fire risk at ambient temperature
  • Compact 14.5 mm diameter fits AeroScout T2S sensor tags and compatible devices

Xeno Energy XLP-050F 3.6V Lithium Battery

The Xeno Energy XLP-050F is a 3.6V 1/2 AA lithium primary cell rated at 1.2Ah capacity. It is built for devices that require a stable high operating voltage over a long service life. The cell uses an inorganic electrolyte and a connector termination style for direct integration. It suits applications needing reliable power across a wide temperature span.

Suits sensors and tags needing long shelf life

Engineers maintaining AeroScout T2S sensor tags or compatible models such as T5, T5B, T5C, T2EB and TAC variants will find this cell a direct match. The 10+ year shelf life and low self-discharge rate support deployments where battery changes are infrequent. It is not rechargeable, so systems requiring secondary chemistry must look elsewhere. The maximum continuous current of 30mA limits use in high-drain designs.

Connector termination simplifies installation

The fitted connector eliminates the need for solder tabs or custom wiring harnesses during replacement. This reduces assembly time and avoids heat exposure to the lithium chemistry. The non-flammable electrolyte and low magnetic signature meet strict safety and environmental requirements. The operating range of -55°C to +85°C allows reliable function in harsh conditions.

Highlights

  • High operating voltage remains stable for most of the application lifetime
  • Shelf life exceeds 10 years with under 1% capacity loss after one year at +20°C
  • Operates reliably from -55°C to +85°C for extreme environments
  • Non-flammable inorganic electrolyte eliminates fire risk at ambient temperature
  • Compact 14.5 mm diameter fits AeroScout T2S sensor tags and compatible devices

Specifications

Battery Type1/2 AA Lithium

Questions about this item

What device connector does the XLP-050F need to fit my AeroScout T2S sensor tag?

The battery uses a connector termination style that matches the AeroScout T2S Sensor Tag Battery 3.6V 1.2Ah specification.

Will this 3.6V lithium cell safely replace the original battery in my TAG-2300-C or TAC-232 hardware?

It is listed as compatible with TAG-2300-C, TAC-232, TAC-233, T5 series, T2EB and TAC241 through 244 models.

How can I verify the XLP-050F is delivering the correct 3.6V output after installation?

Measure the terminal voltage with a multimeter; a fresh cell should read approximately 3.6V under light load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.