Xeno Energy
Xeno Energy XL-100F 3.6V 3.6Ah Lithium Battery 12-Pack
Twelve 3.6 V A-size lithium cells deliver 3.6 Ah each with a 10+ year shelf life and operation from -55 °C to +85 °C
- Battery TypeA Size
- Ready for long-term deployment with 10+ year shelf life
- Powers devices reliably across -55°C to +85°C operating range
- Minimal self-discharge under 1% per year at 20°C storage
- Delivers stable 3.6V output with 3.6Ah capacity per cell
- 12-pack supplies multiple units for larger installations
Pack of twelve A-size lithium cells
This pack contains twelve Xeno Energy XL-100F batteries built in the standard A form factor. Each cell delivers a nominal 3.6 volts and a rated capacity of 3.6 ampere-hours. The lithium chemistry provides a shelf life exceeding ten years with very low self-discharge. They are supplied new with button-top terminations ready for installation.
Suited for long-life low-drain devices
These cells suit equipment that draws steady currents up to 100 milliamps or short pulses up to 200 milliamps. They operate reliably across a temperature span from minus fifty-five to plus eighty-five degrees Celsius. Buyers needing rechargeable batteries or devices requiring higher continuous current should look at other chemistries. The non-rechargeable design also makes them unsuitable for applications needing frequent cycling.
3.6 Ah capacity at 3.6 V
The defining specification is the 3.6 Ah capacity delivered at a stable 3.6 V nominal voltage. This energy density supports multi-year operation in metering, security and remote monitoring hardware. The inorganic electrolyte is non-flammable at ambient temperature but corrosive, so the casing must remain intact. Always observe the storage limit of thirty degrees Celsius to preserve the rated shelf life.
Highlights
- Ready for long-term deployment with 10+ year shelf life
- Powers devices reliably across -55°C to +85°C operating range
- Minimal self-discharge under 1% per year at 20°C storage
- Delivers stable 3.6V output with 3.6Ah capacity per cell
- 12-pack supplies multiple units for larger installations
Specifications
| Battery Type | A Size |
|---|
Questions about this item
How long can the XL-100F sustain its maximum continuous current of 100 mA before voltage drops?
The XL-100F is rated for a maximum recommended continuous current of 100 mA. Sustained loads at or near this level will gradually reduce voltage over the 3.6 Ah capacity.
What temperature rise should I expect when the XL-100F runs at 100 mA continuously in a sealed enclosure?
Operating range is -55 °C to +85 °C. Self-heating at 100 mA is minimal; the non-flammable inorganic electrolyte and low magnetic signature keep thermal output low during extended use.
What termination style does the XL-100F use and can I solder directly to it?
Each cell has a button-top termination. Soldering tabs must be completed in a few seconds to avoid heat damage; the electrolyte is corrosive if the casing is breached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



