Xeno Energy
Xeno Energy XL-060F 3.6V AA 2.4Ah Lithium Battery with Tabs 6-Pack
Six 3.6 V AA lithium cells with solder tabs deliver 2.4 Ah capacity, 10-year shelf life and operation from -55 °C to +85 °C
- Battery TypeAA
- Delivers stable 3.6 V output through most of its service life
- Stores up to 2.4 Ah in standard AA size
- Retains charge over 10 years with less than 1 % annual self-discharge
- Operates reliably from -55 °C to +85 °C
- Non-flammable inorganic electrolyte and low magnetic signature
Six-cell 3.6 V lithium pack
This six-pack supplies 3.6 V AA lithium thionyl-chloride cells rated at 2.4 Ah each. They arrive with solder tabs on both ends for direct PCB attachment. The chemistry is non-rechargeable and intended for long-life, low-drain applications such as utility metering, alarms or remote sensors.
Steady 60 mA with 120 mA pulse headroom
The maker rates continuous draw at 60 mA and allows short pulses up to 120 mA. Voltage remains stable through most of the service life and self-discharge stays below 1 % per year at 20 °C. Operation is specified from -55 °C to +85 °C, so the cells suit outdoor or industrial environments.
Verify tab soldering and series rules
Check that your design can solder the tabs within a few seconds to avoid heat damage. Do not mix these cells with other models in series and ensure the storage area stays below 30 °C, dry and ventilated. The electrolyte is corrosive; discard any cell with a mangled casing.
Highlights
- Delivers stable 3.6 V output through most of its service life
- Stores up to 2.4 Ah in standard AA size
- Retains charge over 10 years with less than 1 % annual self-discharge
- Operates reliably from -55 °C to +85 °C
- Non-flammable inorganic electrolyte and low magnetic signature
Specifications
| Battery Type | AA |
|---|
Questions about this item
How much heat can the XL-060F handle during continuous operation?
The cells operate from -55°C to +85°C, so they tolerate sustained high temperatures well beyond typical indoor use.
What device connection is needed to use the solder tabs?
The tabs are designed for direct PCB soldering; a spot-welder or quick hand-soldering iron is required to attach them.
Will these cells safely replace my existing Tadiran TL-2100 batteries?
Yes, the XL-060F is listed as compatible with the TL-2100 and other common 3.6 V AA lithium models.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



