We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve AA lithium cells with solder tabs on both ends

Xeno Energy

Xeno Energy XL-060F 3.6V AA 2.4Ah Lithium Battery with Tabs 12-Pack

SKU CH-97VC-0WJ2C

Twelve 3.6 V AA lithium cells with solder tabs deliver 2.4 Ah capacity, a 10-year shelf life and operation from -55 °C to +85 °C

  • Battery TypeAA
  • 12-pack delivers 2.4 Ah each for long runtime
  • 6 V high voltage stays stable through most of the life
  • 10+ year shelf life with under 1% yearly self-discharge
  • Operates from -55 °C to +85 °C in humid conditions
  • Non-flammable inorganic electrolyte and low magnetic signature

12-Pack 3.6V AA Lithium Cells

This pack supplies twelve Xeno Energy XL-060F primary lithium batteries, each rated at 3.6 volts and 2.4 Ah. They are built for equipment that needs a single AA-sized cell with solder tabs on both ends. The chemistry delivers a high, stable voltage and a shelf life exceeding ten years, making the pack suitable for long-term deployments in metering, security or industrial monitoring devices.

Replacing older 3.6V AA lithium types

The XL-060F is a direct substitute for Tadiran TL-2100, TL-4903, TL-5104, TL-5903, Saft LS-14500 and SL-760, Toshiba ER6V and ER6LV, and Maxell ER6V models. The upgrade is worthwhile when an application demands the 2.4 Ah capacity, a maximum continuous current of 60 mA or a pulse capability of 120 mA, and can benefit from the very low self-discharge rate of less than one percent per year at twenty degrees Celsius.

Check voltage, tabs and temperature limits

Verify that the host device is designed for a 3.6 V primary lithium cell and cannot accept a rechargeable alternative, as recharging is prohibited. Confirm the PCB layout matches the tab termination style and that soldering can be completed in a few seconds to avoid heat damage. Ensure the operating environment stays within the minus fifty-five to plus eighty-five degrees Celsius range and that storage conditions remain clean, cool, dry and ventilated below thirty degrees Celsius.

Highlights

  • 12-pack delivers 2.4 Ah each for long runtime
  • 6 V high voltage stays stable through most of the life
  • 10+ year shelf life with under 1% yearly self-discharge
  • Operates from -55 °C to +85 °C in humid conditions
  • Non-flammable inorganic electrolyte and low magnetic signature

Specifications

Battery TypeAA

Questions about this item

Will these AA lithium batteries with tabs fit the same holder as a standard AA cell?

They share the AA diameter but have solder tabs on both ends, so a spring-contact holder will not work; they must be soldered directly to the board.

What is the maximum safe soldering time for the tabs on these 3.6V 2.4Ah cells?

Finish soldering each tab in a few seconds to avoid heat damage to the non-flammable inorganic electrolyte.

How long can I store the unused batteries from this 12-pack before they lose significant capacity?

Less than 1% capacity loss per year at 20°C, with a shelf life exceeding 10 years when kept clean, cool, dry and ventilated below 30°C.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.