We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three cylindrical AA lithium batteries with axial wire leads side by side

Xeno Energy

Xeno Energy XL-060F 3.6V AA 2.4Ah Lithium Battery Axial Leads 3-Pack

SKU CH-SQWH-1Q2NE

Three 3.6 V AA lithium cells with axial leads deliver 2.4 Ah capacity, 10-year shelf life and operation from -55 °C to +85 °C

  • Battery TypeAA
  • 6 V high operating voltage stays stable through most of the service life
  • 4 Ah capacity ranks among the highest available for AA lithium cells
  • 10+ year shelf life with less than 1 % capacity loss per year at 20 °C
  • Operates reliably from -55 °C to +85 °C in humid conditions
  • Axial leads enable quick soldered installation in compatible devices

Xeno XL-060F AA Lithium 3-Pack

These Xeno XL-060F AA lithium thionyl chloride cells deliver 3.6 volts and 2.4 ampere-hours each. They arrive new in a three-piece pack with axial leads for direct PCB soldering. The chemistry suits long-life industrial and metering applications where replacement access is difficult. Non-rechargeable design means they must never be placed in a charger.

Continuous 60 mA Limit and Temperature Range

Maximum recommended continuous current is 60 milliamperes with a pulse capability of 120 milliamperes. Operating range spans minus 55 to plus 85 degrees Celsius. Self-discharge stays below one percent per year at 20 degrees Celsius. Shelf life exceeds ten years when stored below 30 degrees Celsius in dry, ventilated conditions. Solder tabs require only a few seconds of heat to avoid damage.

Replaces Tadiran Saft and ER6 Equivalents

Direct replacements include Tadiran TL-2100, TL-4903, TL-5104, TL-5903, Saft LS-14500, SL-760, Toshiba ER6V, ER6LV and Maxell ER6. The jump is worth it when existing primary cells have reached end of voltage plateau or when a design needs the stable high operating voltage this chemistry maintains. Not for devices that expect rechargeable 1.5 volt AA cells or that draw more than the rated continuous current.

Highlights

  • 6 V high operating voltage stays stable through most of the service life
  • 4 Ah capacity ranks among the highest available for AA lithium cells
  • 10+ year shelf life with less than 1 % capacity loss per year at 20 °C
  • Operates reliably from -55 °C to +85 °C in humid conditions
  • Axial leads enable quick soldered installation in compatible devices

Specifications

Battery TypeAA

Questions about this item

Should I buy this 3-pack or look for a different capacity?

Each cell delivers 2.4 Ah at 3.6 V, so the 3-pack gives three identical AA lithium units with axial leads ready for series or parallel wiring.

What does the 3.6 V rating mean once the battery is powering my device?

The voltage stays near 3.6 V through most of the discharge curve, dropping only near end of life, which keeps sensitive electronics stable without regulation.

How do the 60 mA continuous and 120 mA pulse limits affect my design?

The lithium-thionyl chloride chemistry caps steady draw at 60 mA and short bursts at 120 mA; exceeding either reduces capacity and can damage the cell.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.