Xeno Energy
Xeno Energy XL-060F 3.6V AA 2.4Ah Lithium Battery 12-Pack
A 12-pack of 3.6V AA lithium cells delivering 2.4Ah capacity with a 10-year shelf life and operation from -55°C to +85°C
- Battery TypeAA
- 12-pack supplies long-term power for multiple devices
- 6 V high operating voltage remains stable through most of the battery life
- 4 Ah capacity among the highest nominal ratings available today
- 10+ year shelf life with less than 1% self-discharge per year at 20 °C
- Operates reliably from -55 °C to +85 °C in humid conditions
12-Pack 3.6V AA Lithium Batteries
This 12-pack supplies Xeno Energy XL-060F AA cells rated at 3.6 volts and 2.4 Ah each. They use lithium chemistry with button-top termination and are designed for devices that require a high, stable operating voltage over a long service life.
Suits long-life low-drain devices.
These cells suit meters, sensors, trackers and backup circuits that draw up to 60 mA continuously or 120 mA in pulses and must run for years without replacement. They are not rechargeable, so buyers who need a rechargeable AA format should look at a different chemistry.
Simple drop-in replacement.
Installation is a direct drop-in for any AA holder that accepts button-top cells. The only common issues are reversing polarity, mixing fresh cells with partially used ones, or exposing the pack to temperatures above 30 °C during storage, which can shorten the 10-year shelf life.
Highlights
- 12-pack supplies long-term power for multiple devices
- 6 V high operating voltage remains stable through most of the battery life
- 4 Ah capacity among the highest nominal ratings available today
- 10+ year shelf life with less than 1% self-discharge per year at 20 °C
- Operates reliably from -55 °C to +85 °C in humid conditions
Specifications
| Battery Type | AA |
|---|
Questions about this item
Do I need a device with a button-top AA contact to use these Xeno XL-060F cells?
Yes, each cell has a button-top termination, so the equipment must accept that style of AA contact.
Can I mix these 3.6 V lithium AA batteries with 1.5 V alkaline AA cells in the same device?
No, the supplier warns against using different models in series; mixing chemistries and voltages will cause improper operation or damage.
How can I verify the pack is performing correctly after installation?
Measure each cell with a multimeter; a fresh unit should read about 3.6 V and the device should draw no more than 60 mA continuous or 120 mA pulse.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



