Xeno Energy
Xeno Energy XL-055F 3.6V 2/3 AA 1.65Ah Lithium standard battery 12-Pack
Twelve 3.6 V 2/3 AA lithium cells with axial leads deliver 1.65 Ah capacity and 10-year shelf life
- Battery Type2/3 AA
- Reliable power for a decade with 10+ year shelf life
- High capacity 1.65 Ah cells deliver extended runtime
- Stable 3.6 V output maintained through most of service life
- Wide -55°C to +85°C operating range suits harsh environments
- Axial leads enable direct PCB soldering for secure connections
Professional Power Cells
Xeno Energy XL-055F batteries deliver 3.6 Volt output and 1.65 Ah capacity in a 2/3 AA form factor. The 12-pack suits engineers and technicians who need dependable primary power for industrial sensors, utility meters, or remote telemetry units. Axial leads allow direct PCB mounting without holders.
Thermal Stability And Draw
Operating range spans -55°C to +85°C with a low self-discharge rate below 1% per year at +20°C. Recommended continuous current is 60mA maximum while pulse capability reaches 150 mA. Non-flammable inorganic electrolyte and low magnetic signature support stable performance in harsh or humid environments.
Replaces Legacy Cylindrical Types
These cells substitute for ER14335, SL-361, SL-761 and TL-21 references where 3.6 Volt lithium chemistry is specified. The jump is worth it when designs demand 10+ years shelf life, minimal capacity loss during storage, and consistent voltage across the discharge curve. Not for rechargeable applications or series strings mixing different models.
Highlights
- Reliable power for a decade with 10+ year shelf life
- High capacity 1.65 Ah cells deliver extended runtime
- Stable 3.6 V output maintained through most of service life
- Wide -55°C to +85°C operating range suits harsh environments
- Axial leads enable direct PCB soldering for secure connections
Specifications
| Battery Type | 2/3 AA |
|---|
Questions about this item
How do I solder the axial leads without damaging the XL-055F?
Apply heat for only a few seconds per joint; prolonged soldering can harm the internal electrolyte and void performance.
What storage conditions maximise the 10-year shelf life?
Keep the pack in a clean, dry, ventilated area below 30 °C; self-discharge stays under 1% per year at 20 °C.
What continuous current can I draw before voltage sags on this 1.65 Ah cell?
The recommended maximum is 60 mA continuous; pulse loads up to 150 mA are supported for short bursts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



