We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
WUQ 0-gauge amp kit with orange and grey CCA wires and fuse holder

WUQ

WUQ Premium Series 0-Gauge Amp Kit 3600W CCA 17ft 12 16 100 car electronics accessory

SKU CH-ZZBY-CH54V

Complete amplifier installation kit delivering 3600W through 17 ft of 0-gauge CCA power wire with 100-Amp fuse protection

  • TypeAmplifier & Processor Remotes
  • Supports 3600W max power with 0-gauge CCA wire
  • 17 ft triple-shielded RCA cables reduce signal interference
  • 17 ft 12-gauge speaker wire handles high-power audio
  • 17 ft 16-gauge remote wire enables amplifier turn-on
  • 100-Amp ANL fuse holder protects the electrical system

0-Gauge Amplifier Install Kit

This 0-gauge amplifier install kit provides the wiring needed to connect a high-power car audio amplifier. It is intended for installers building a system that demands heavy current delivery and clean signal paths.

Triple-Shielded RCA and Soft-Touch CCA

The kit uses 17 ft of orange soft-touch copper-clad aluminium power wire and 3 ft of matching ground wire for low-resistance power distribution. Triple-shielded twisted-pair RCA interconnects run 17 ft to reject interference between the head unit and amplifier. A 17 ft 12-gauge speaker wire pair and 17 ft 16-gauge remote turn-on wire complete the signal and control runs.

100-Amp Mini-ANL Fuse Protection

A mini-ANL fuse holder with a 100-Amp fuse is included to protect the power cable and connected equipment from short-circuit damage. The kit also supplies ring terminals and copper ferrules for secure termination at the battery, amplifier and chassis ground points.

Highlights

  • Supports 3600W max power with 0-gauge CCA wire
  • 17 ft triple-shielded RCA cables reduce signal interference
  • 17 ft 12-gauge speaker wire handles high-power audio
  • 17 ft 16-gauge remote wire enables amplifier turn-on
  • 100-Amp ANL fuse holder protects the electrical system

Specifications

TypeAmplifier & Processor Remotes

Questions about this item

How do I route the 17 ft 0-gauge orange soft-touch CCA power wire and where does the ANL fuse holder with its 100-Amp fuse go?

Run the power wire from the battery to the amplifier and mount the ANL fuse holder with its 100-Amp fuse as close to the battery as practical, then connect the ring terminals and copper ferrules supplied in the kit

Which parts of this kit will need checking or replacement after extended use?

Inspect the 100-Amp ANL fuse and the fuse holder contacts periodically, and check the ring terminals and copper ferrules on the 0-gauge CCA power wire and the 12-gauge speaker wire for corrosion or loosening

What is the first limit reached when this kit runs at high output for long periods?

The 0-gauge copper-clad aluminum power wire and the 100-Amp ANL fuse set the continuous current ceiling, so sustained loads approaching 3600W will hit the fuse rating and the CCA conductor's ampacity first

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.