We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
AudioControl LC1i line output converter with 8-gauge amplifier kit components

WUQ

WUQ LC1i 2-Channel Line Output Converter & 8-Gauge Amp Kit car electronics accessory

SKU CH-VTDV-MCX73

Two-channel line output converter with 8-gauge amplifier kit adds an aftermarket amp to a factory radio at 12 volts

  • TypeOutput Converter
  • Active 2-channel line driver adds amplifier to factory radio
  • Impedance matching delivers distortion-free output
  • RCA interface connects to aftermarket amps
  • 12 V maximum supply voltage suits vehicle electrical systems
  • Compact 4.8" x 3" footprint fits tight installations

Product Purpose

The WUQ LC1i bundle adds a two-channel line output converter and an 8-gauge amplifier wiring kit to a factory car radio. It suits owners who want to keep the original head unit while feeding a clean signal to an aftermarket amplifier.

Build and Connections

The converter measures 4.8 inches long by 3 inches wide and runs on a 12-volt supply. RCA sockets provide the output interface, and the active design handles impedance matching to reduce distortion from speaker-level inputs.

Compatibility Check

Verify that your factory radio delivers speaker-level outputs the converter can accept. Confirm there is space for a 4.8 by 3 inch module and that your amplifier uses RCA inputs. The kit includes 8-gauge power wire, so ensure your planned current draw suits that gauge.

Highlights

  • Active 2-channel line driver adds amplifier to factory radio
  • Impedance matching delivers distortion-free output
  • RCA interface connects to aftermarket amps
  • 12 V maximum supply voltage suits vehicle electrical systems
  • Compact 4.8" x 3" footprint fits tight installations

Specifications

TypeOutput Converter

Questions about this item

What maximum supply voltage does the RCA line output converter accept?

The unit is rated for a maximum supply voltage of 12 volts, which matches a standard vehicle electrical system.

What are the physical dimensions of the converter for mounting?

The converter measures 4.8 inches long by 3 inches wide, so check that your chosen mounting location has at least that much clear space.

How is the LC1i connected to a factory radio, and what wiring mistake should be avoided?

Tap the converter's speaker-level inputs into the factory radio's speaker wires, then run RCA cables to the amplifier; the common error is reversing polarity on the speaker leads, which causes phase cancellation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.