We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black shock pump with swivel hose and analog gauge

WUQ

WUQ Compact Suspension Fork & Rear Shock Pump 350psi

SKU CH-XPS4-R5R74

A compact 350 psi shock pump with a 360-degree swivel hose, analog gauge and tap bleed valve for precise mountain-bike suspension tuning

  • TypeSuspension Forks
  • Compact 9.5 x 3.25 x 1.5 inch size packs easily in any bag
  • 350 psi maximum pressure covers full range of MTB fork and shock settings
  • Schrader valve compatibility works with standard mountain bike suspension valves
  • 360 degree swivel hose lets you pump from any angle without kinking
  • Tap bleed valve button gives precise air release for exact pressure tuning

Compact 350 psi Suspension Pump

The WUQ compact suspension fork and rear shock pump delivers up to 350 psi for mountain bike air springs. It fits Schrader valves and packs to 9.5 x 3.25 x 1.5 inches for trail-side carry. The 360-degree swivel hose lets you orient the head without kinking the line. A rounded handle sits comfortably in the palm for repeated strokes.

Thermals Noise and Power Draw

As a hand-operated tool the pump generates no electrical noise or heat and draws zero power from a battery or wall outlet. The analog gauge reads pressure directly so you can watch the needle climb without backlight drain. A tap bleed button vents air in small increments for precise tuning. Mechanical effort is the only energy input required.

Upgrade Path and When It Is Worth It

Riders moving from a floor pump with a pressure gauge that tops out below 350 psi gain the range needed for modern air forks and shocks. The compact form replaces bulky shop pumps when pack space is limited. It is not suited for high-volume tubeless tyre seating or riders who need a digital readout. Builders who want an integrated pressure logger should look elsewhere.

Highlights

  • Compact 9.5 x 3.25 x 1.5 inch size packs easily in any bag
  • 350 psi maximum pressure covers full range of MTB fork and shock settings
  • Schrader valve compatibility works with standard mountain bike suspension valves
  • 360 degree swivel hose lets you pump from any angle without kinking
  • Tap bleed valve button gives precise air release for exact pressure tuning

Specifications

TypeSuspension Forks

Questions about this item

How do I connect the pump to a Schrader valve on my fork or shock?

Thread the pump head straight onto the Schrader valve until it seats, then use the 360-degree swivel hose to orient the gauge for easy reading while you pump.

What part of this pump is most likely to need replacement over time?

The Schrader valve core and the hose O-rings are the wear items; keep a spare valve core and a small O-ring kit in your pack for trail-side repairs.

At what pressure does the gauge become hardest to read accurately during a long inflation session?

The analog gauge reads to 350 psi; near the top of its scale the needle increments are smallest, so final adjustments are easier if you overshoot slightly and bleed down with the tap button.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.