We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White marine amplifier with wired remote and stainless hardware

WUQ

WUQ Class D Marine Amplifier 150W x 2 Bridgeable car electronics accessory

SKU CH-GJKZ-H6TMS

Powers marine and off-road audio with 150 watts per channel, Class-D efficiency, a waterproof wired remote, and stainless-steel hardware

  • TypeAutomotive Accessories
  • Class-D marine amplifier delivers 150 W per channel RMS power
  • Bridgeable design provides 300 W max output for two channels
  • IP-rated wired remote with three-colour LED survives immersion
  • Stainless-steel hardware and rust-proof aluminium heatsink resist corrosion
  • USB charging port supplies 5 V 1 A for devices

Marine Class-D Amplifier for Powersports

This bridgeable Class-D marine amplifier delivers 150 watts per channel into 4-ohm speakers with a maximum output of 300 watts. It is designed for boats, UTVs, ATVs and golf carts where a traditional head unit is not required. The unit includes a 3-metre wired remote with a three-colour LED indicator for source selection across USB, AUX and Bluetooth inputs. A rustproof aluminium heatsink and stainless-steel mounting hardware withstand harsh marine environments.

Professional Installation Strongly Recommended

The manufacturer states that installation knowledge is required and strongly advises reading the wiring guide carefully or using a professional installer. The wired remote uses an S-terminal connector that must be kept tight and features a silicone gasket to protect against water immersion. Two 10-amp maxi fuses are specified for the power circuit and a thick power cable is suggested for stable operation. Incorrect wiring can prevent the amplifier from working properly or lasting long term.

Verify Battery Capacity and Speaker Match

Before ordering, confirm that your vehicle has a large battery capable of supplying constant power for the 100-watt RMS per channel draw. Ensure your speakers are rated for 4 ohms and 150 watts to match the amplifier's drive specifications. The frequency response covers 20 Hz to 20 kHz and a USB port provides 5-volt, 1-amp charging for devices. All mounting screws and kits are stainless steel for corrosion resistance.

Highlights

  • Class-D marine amplifier delivers 150 W per channel RMS power
  • Bridgeable design provides 300 W max output for two channels
  • IP-rated wired remote with three-colour LED survives immersion
  • Stainless-steel hardware and rust-proof aluminium heatsink resist corrosion
  • USB charging port supplies 5 V 1 A for devices

Specifications

TypeAutomotive Accessories

Questions about this item

How can I confirm the amplifier is delivering 100 W RMS per channel after installation?

Measure the output with a multimeter while playing a 1 kHz test tone at full volume into a 4 ohm load; each channel should read about 20 V AC if the amp is producing its rated 100 W RMS.

What comes in the box and what must I purchase separately?

The package includes the Class-D marine amplifier, a 3 m wired remote with S-terminal connector and 3-color LED indicator, stainless-steel mounting hardware and two 10 A maxi fuses; you must supply a 4 ohm 150 W speaker pair, a large vehicle battery and thick power and ground cables.

Should I run the amp in stereo or bridge it for a single subwoofer?

In stereo mode the amp delivers 100 W RMS per channel into 4 ohms, suitable for a pair of full-range speakers; bridged it can produce 300 W max into a single 4 ohm load, ideal for one subwoofer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.