We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
WUQ 5 inch CCTV tester with 800x480 screen and 2600mAh battery

WUQ

WUQ 5 inch 4-in-1 CCTV Tester 1080P 800x480 2600mAh

SKU CH-WE07-N3VDJ

A portable 5-inch CCTV tester with an 800x480 screen that checks AHD, TVI, CVI and CVBS analogue cameras up to 8 MP, tests UTP cables and PTZ control.

  • TypeTest Instrument & Gauge Parts
  • 5 inch 800x480 screen shows clear camera images
  • Built-in 2600mAh 18650 battery runs up to 11 hours
  • Tests AHD TVI CVI CVBS analog cameras up to 8MP
  • VGA and HDMI 1.1 input for DVR NVR debugging
  • UTP cable test PTZ control audio test DC12V output

5-inch 4-in-1 CCTV Tester

This 5-inch 4-in-1 CCTV tester is built for installers and technicians who service analog security camera systems. It combines a monitor, PTZ controller, UTP cable tester and audio check in one handheld unit. The 800×480 TFT-LCD screen provides a clear view of camera feeds during setup and troubleshooting. It is not designed for IP or PoE camera networks.

2600 mAh battery and 11-hour runtime

The integrated 18650 2600 mAh battery charges in three to four hours and delivers up to 11 hours of continuous operation. That capacity comfortably covers a full day of on-site camera alignment, cable verification and recorder debugging. Extended sessions or multiple sites back-to-back will require a recharge or a spare power source.

Replaces separate monitor.

This unit consolidates the separate monitor, PTZ controller and UTP cable tester that technicians traditionally carry. The jump is worthwhile when you need one lightweight tool that handles analog video up to 8 MP, VGA and HDMI 1.1 input, plus 12 V DC camera power output. It does not support IP PoE cameras, so networks using that technology will need different equipment.

Highlights

  • 5 inch 800x480 screen shows clear camera images
  • Built-in 2600mAh 18650 battery runs up to 11 hours
  • Tests AHD TVI CVI CVBS analog cameras up to 8MP
  • VGA and HDMI 1.1 input for DVR NVR debugging
  • UTP cable test PTZ control audio test DC12V output

Specifications

TypeTest Instrument & Gauge Parts

Questions about this item

Will the 800x480 screen show a clear picture from my existing 1080P analog cameras?

Yes, the tester supports AHD, TVI, CVI and CVBS signals up to 8MP, so a 1080P camera image appears on the 5 inch display.

How do I confirm the built-in 2600mAh 18650 battery is holding a full charge after the first 3-4 hour cycle?

The unit runs for about 11 hours on a full charge; if it powers the screen and DC12V output for that span the battery is working correctly.

Does the box include the PTZ control cables and UTP test leads, or must I buy them separately?

The tester has built-in PTZ control and UTP cable test functions, so no extra leads are required for those features.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.