We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular Gigabit PoE switch with two ports and matte finish

WRIARICH

WRIARICH Gigabit PoE Switch 2 Port 60W 3.03 x 2.17 x .83 in

SKU CH-26BR-F7792

Two-port Gigabit PoE switch delivers up to 60 W total power to IP cameras or access points over 328 ft using Cat5e or Cat6 cable

  • Switch TypeGigabit
  • PoE Ports2 x PoE
  • Dimensions3.03 x 2.17 x 0.83 inches
  • Features802.3at/af PoE Compliant
  • Package ContentsEthernet POE 1x2 Splitter
  • Expands one gigabit link into two powered ports
  • Delivers up to 60 W total PoE power output
  • Supports IEEE 802.3 af/at for 15.4 W or 30 W per port
  • Extends network and power up to 328 ft over Cat5e or better
  • Ultra-compact 3.03 x 2.17 x .83 in form factor fits tight spaces

Gigabit PoE Splitter 1-to-2

This compact Gigabit switch expands a single network connection into two PoE-enabled ports. It suits installers adding IP cameras or wireless access points where only one Ethernet drop exists. The unit delivers up to 60 W total power budget across both ports.

Plug-and-play with Cat5e or Cat6

Installation requires only a compatible PoE source and Category 5e or better cabling; no separate power adapter is included. A Cat6 cable is needed to reach 1000 Mbps throughput. The device operates as a splitter or as an injector and extender depending on the upstream equipment.

60 W budget and 328 ft reach

Each port can supply 15.4 W (PoE) or 30 W (PoE+), sharing the 60 W pool. The switch maintains Gigabit speeds up to 328 ft when wired with Cat6. Builds needing more than two powered devices or a higher per-port budget will require a larger PoE switch.

Highlights

  • Expands one gigabit link into two powered ports
  • Delivers up to 60 W total PoE power output
  • Supports IEEE 802.3 af/at for 15.4 W or 30 W per port
  • Extends network and power up to 328 ft over Cat5e or better
  • Ultra-compact 3.03 x 2.17 x .83 in form factor fits tight spaces

Specifications

Switch TypeGigabit
PoE Ports2 x PoE
Dimensions3.03 x 2.17 x 0.83 inches
Features802.3at/af PoE Compliant
Package ContentsEthernet POE 1x2 Splitter

Questions about this item

How can I confirm the switch is delivering PoE+ power to both ports after connecting my devices?

Connect each PoE port to an IP camera or access point; the switch complies with IEEE 802.3at/af and supplies up to 30W per port with a total budget of 60W, so both devices should power on and pass data at Gigabit speed.

What comes in the box and what must I supply myself?

The package includes the 1-to-2 Ethernet PoE splitter only; you must provide a PoE injector or PoE-enabled upstream switch, a power adapter for that source, and Cat5e or Cat6 cables — Cat6 is required for 1000Mbps operation.

Which version should I choose if I need to run two PoE cameras up to 328 ft from a single PoE source?

This single model provides 2 PoE ports with 60W total output and supports both PoE splitter and PoE injector/extender modes, so it covers the requirement without a separate version choice.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.