WRIARICH
WRIARICH 8K DP KVM Switch 2 PC 2 Monitor 4K@120Hz 8K@60Hz DP 1.4 USB 3.0
Dual-monitor DisplayPort KVM switch shares two computers across two displays at up to 8K@60Hz or 4K@120Hz with four USB 3.0 ports
- TypeUSB
- PC ConnectorsPlug In
- Console ConnectorsPlug In
- Computer ConnectionsUSB 2.0
- Monitor Connections4 Ports
- PC SelectionPush Buttons
- Share two PCs across dual monitors at 8K 60 Hz via DisplayPort 1.4
- Switch instantly with front buttons or 1.5 m wired remote
- Four USB 3.0 ports deliver 5 Gbps peripheral throughput
- Included 5 V 1 A adapter keeps high-power devices stable
- Plug-and-play on Windows Mac Linux with no drivers needed
Dual-computer dual-monitor KVM
The WRIARICH DisplayPort KVM switch lets two computers share two monitors and four USB 3.0 peripherals. It supports extended and duplicate display modes so each system can drive both screens independently. Both computers must provide two DisplayPort outputs for full dual-monitor operation. A wired desktop controller with a 1.5 m cable is included for remote switching.
Resolution headroom and bandwidth limits
The switch handles up to 8K at 60 Hz and 4K at 144 Hz, with backward compatibility down to 1080p and 720p. Mixed-resolution sources are detected automatically when switching between computers. USB 3.0 ports deliver 5 Gbps throughput for storage and accessories. The unit does not support hotkey switching or resolutions beyond the stated 8K ceiling.
Power, thermals and acoustics
A 5 V 1 A DC adapter is supplied to guarantee stable operation with high-power USB devices; the switch can run without it for low-power peripherals. The enclosure carries an IP30 rating and has no moving parts, so it operates silently. Power draw scales only with attached USB loads and the DisplayPort signalling itself.
Highlights
- Share two PCs across dual monitors at 8K 60 Hz via DisplayPort 1.4
- Switch instantly with front buttons or 1.5 m wired remote
- Four USB 3.0 ports deliver 5 Gbps peripheral throughput
- Included 5 V 1 A adapter keeps high-power devices stable
- Plug-and-play on Windows Mac Linux with no drivers needed
Specifications
| Brand | TRENDnet |
|---|---|
| Model | KS935 |
| Part Number | KS935 |
| Type | USB |
| PC Connectors | Plug In |
| Console Connectors | Plug In |
| Computer Connections | USB 2.0 |
| Monitor Connections | 4 Ports |
| PC Selection | Push Buttons |
| Monitors Supported | VGA DDC, DDC2, DDC2B |
| Audio Features | Offers audio and microphone switching |
| Power Features | Requires no additional power supply |
| USB Features | with USB support |
| SplitterOnly | VGA Monitor Splitter only |
| Application | Plug In, DP, touch |
| Features | Plug In, DP, touch, 8, IP30, Push Button |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
| Package Contents | with Built-in Cables |
Questions about this item
Will the WRIARICH KVM switch work with my older monitors that only support 1080P or 720P resolution?
Yes, the switch is backward compatible with 2K@144Hz, 1080P and 720P resolutions, automatically identifying the signal source resolution when switching between computers.
How can I verify the USB 3.0 ports are running at the full 5 Gbps speed after connecting my devices?
Connect a USB 3.0 flash drive and check the transfer speed in your operating system; sustained reads well above USB 2.0 levels confirm the 5 Gbps link is active.
Which cables are included with the WRIARICH KVM switch and do I need to buy any separately for a two-computer, two-monitor setup?
The package includes 4 DisplayPort cables and 2 USB cables for connecting both computers; no extra cables are required for the standard dual-PC, dual-monitor configuration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation 4K60 HDMI Dual-Head KVM Switch 4 Port
$774.99
0.00928232BTC
In stock