WORKPRO Office Chair Saver Kit 304 Stainless Steel 25-27 mm Silver Blue
A 304 stainless-steel clamp with silicone gaskets locks a 25-27 mm gas-lift cylinder at a chosen height, stopping the chair from sinking without removing the cylinder
- TypeBelow-the-Hook Lifting Accessories
- MaterialMetal
- Compatibility/FitmentAdhesives; Enamels; Epoxies
- Stops chair sinking with 304 stainless steel clamps
- Fits 25-27 mm cylinders using silicone gaskets
- Adjust height without removing the gas lift
- Installs in minutes with included hex wrench
- Metal construction outlasts plastic alternatives
Fix Sinking Office Chair
The WORKPRO Office Chair Saver Kit uses a 304 stainless steel clamp to stop a gas lift cylinder from sinking. It fits cylinders with an outer diameter of 25-27 mm and includes a hexagon wrench for installation. The clamp holds the chair at a fixed height without replacing the cylinder. Silicone gaskets on the brackets grip the cylinder securely.
Check Cylinder Diameter Before Ordering
Measure the outer diameter of your chair’s gas lift cylinder to confirm it falls within the 25-27 mm range. The kit is designed for this specific size and will not clamp smaller or larger cylinders effectively. No disassembly of the chair or cylinder is required for fitting. Ensure you have access to the cylinder shaft to slide the clamp into place.
Ideal for Permanent Height Lock
This suit buyers who want a permanent, tool-fitted solution to stop an office chair from sinking. It is not for users who need frequent height adjustment after installation. The clamp fixes the chair at one chosen height. Buyers with cylinders outside the 25-27 mm range should look for a different diameter clamp.
Highlights
- Stops chair sinking with 304 stainless steel clamps
- Fits 25-27 mm cylinders using silicone gaskets
- Adjust height without removing the gas lift
- Installs in minutes with included hex wrench
- Metal construction outlasts plastic alternatives
Specifications
| Brand | WORKPRO |
|---|---|
| Type | Below-the-Hook Lifting Accessories |
| Material | Metal |
| Compatibility/Fitment | Adhesives; Enamels; Epoxies |
| Part Number | A.I.FORCE |
Questions about this item
What is included in the WORKPRO Office Chair Saver Kit and do I need any extra tools?
The kit contains one 304 stainless steel clamp with silicone gaskets and one Allen wrench; no additional tools are required for installation.
Which cylinder diameter should I choose for my chair — 25 mm, 27 mm or 28 mm?
The clamp fits gas-lift cylinders with an outer diameter of 25-27 mm (0.98-1.1 in), covering the common 28 mm upper range as well.
Once installed, how does the clamp stop my chair from sinking during daily use?
The stainless steel bracket locks onto the cylinder at your chosen height, and the silicone gasket grips the surface so the seat cannot drop under weight.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
