Wooster Brush Company
Wooster Brush Company R241-18 18 inch paint roller cover 3/4 inch nap knit fabric
An 18 inch roller cover with 3/4 inch knit nap for rough surfaces like brick, concrete and drywall
- ColorTransparent
- Covers large areas quickly with 18 inch width
- Handles rough surfaces using 3/4 inch nap knit fabric
- Works with flat, satin, stain and waterproofing paints
- Fits standard yoke frames including BR036-18, BR045-18, BR047-18
- Durable polypropylene core resists wear during heavy use
18 inch cover for rough surfaces
The Wooster R241-18 is an 18 inch paint roller cover with a 3/4 inch nap made from knit fabric. It is designed for applying flat paints, satin paints, stains and waterproofing coatings. The cover fits standard yoke-style roller frames and suits rough surfaces such as brick, concrete, drywall, masonry and wood. Two end caps are included with the cover.
Polypropylene core resists solvents
The 1 1/2 inch diameter core is moulded from polypropylene for chemical resistance during use. Knit fabric construction holds a consistent paint load across the 18 inch width. Low sheen finish helps reduce glare on textured substrates. The cover works with compatible Wooster frames including the BR036-18, BR045-18 and BR047-18 models.
Knit fabric maintains coverage under load
During extended rolling sessions the knit fabric resists matting and keeps releasing paint evenly. The 3/4 inch nap depth carries enough coating for rough pores without frequent re-dipping. Polypropylene core does not soften when exposed to water-based or solvent-based products. The cover is not suited for ultra-smooth surfaces that require a shorter nap roller.
Highlights
- Covers large areas quickly with 18 inch width
- Handles rough surfaces using 3/4 inch nap knit fabric
- Works with flat, satin, stain and waterproofing paints
- Fits standard yoke frames including BR036-18, BR045-18, BR047-18
- Durable polypropylene core resists wear during heavy use
Specifications
| Brand | WOOSTER |
|---|---|
| Color | Transparent |
Questions about this item
How do I fit the 18 inch cover onto a yoke frame, and what step is often missed?
Slide the cover over the yoke frame until the core seats fully, then press both included end caps onto the core ends to lock it in place; skipping the end caps lets the cover shift during rolling.
When will the knit fabric cover need replacement?
Replace the cover when the 3/4 inch nap becomes matted, sheds fibres, or no longer holds enough paint to coat rough brick, concrete, drywall, masonry or wood evenly.
What limit appears first during a long session with flat or satin paints?
The knit fabric nap loads with pigment and loses release, so the cover must be rinsed or swapped before the finish turns streaky or uneven.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
