Wooster Brush Company
Wooster Brush Company R240-18 18" Paint Roller Cover, 1/2" Nap, Knit Fabric
An 18-inch knit-fabric roller cover with a 1/2-inch nap for semi-rough surfaces such as brick, concrete, drywall, masonry and wood
- ColorTransparent
- Covers large areas quickly with 18 inch width
- Handles semi-rough textures using 1/2 inch nap knit fabric
- Works with both oil and water based paints
- Fits standard yoke frames via 1 1/2 inch polypropylene core
- Includes two end caps for secure attachment
18-inch roller cover for semi-rough surfaces
The Wooster R240-18 is an 18-inch paint roller cover with a 1/2-inch nap made from knit fabric. It fits standard yoke-style frames with a 1-1/2-inch core diameter and includes two end caps. The cover works with both oil-based and water-based paints on brick, concrete, drywall, masonry and wood.
Suited for large semi-rough walls and ceilings
Painters covering broad areas of drywall, concrete or masonry will appreciate the wide 18-inch width and knit construction that holds plenty of coating. It is not suited for ultra-smooth finishes such as fine plaster or polished trim, nor for tight corners where a narrower cover or brush is required.
Capacity and headroom on big jobs
The 18-inch width and 1/2-inch nap deliver strong paint pickup for fast coverage on semi-rough substrates. On very rough surfaces like heavy stucco or deeply textured block the nap can load unevenly, and the fixed 18-inch length limits manoeuvrability in confined spaces.
Highlights
- Covers large areas quickly with 18 inch width
- Handles semi-rough textures using 1/2 inch nap knit fabric
- Works with both oil and water based paints
- Fits standard yoke frames via 1 1/2 inch polypropylene core
- Includes two end caps for secure attachment
Specifications
| Brand | WOOSTER |
|---|---|
| Color | Transparent |
Questions about this item
Which roller frames are compatible with the 18 in cover and 1 1/2 in core?
The cover fits yoke-style frames including models 8614, BR412-21, BR045-18, BR047-18 and BR036-18.
Will the 1/2 in nap knit fabric work on semi-rough brick and drywall I already have?
Yes, the 1/2 in nap is designed for semi-rough surfaces such as brick, concrete, drywall, masonry and wood.
How can I confirm the cover is seated correctly after mounting it on the frame?
The two included end caps should sit flush against the frame ends with the knit fabric running evenly along the full 18 in length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
