Wooster Brush Company
Wooster Brush Company R207-12 12" Paint Roller Cover 1/4" Nap Mohair/Polyester
A 12-inch roller cover with a 1/4-inch mohair and polyester nap for smooth finishes on floors and coatings
- ColorTransparent
- 12 in cover fits standard yoke frames
- 1/4 in nap leaves smooth finish on floors and enamels
- Mohair polyester blend holds paint evenly
- Polypropylene core resists solvents and water
- Includes two end caps for secure fit
Product identity
This 12-inch roller cover suits painters who apply enamels, epoxies, urethanes or floor coatings on smooth surfaces. The mohair and polyester blend lays down a thin, even film without texture marks.
Interface limits
The quarter-inch nap holds less paint than heavier covers, so frequent reloading is needed on large areas. It fits only 1½-inch core frames with a yoke style, ruling out cage or screw-on handles.
Install notes
Slide the cover onto the frame until the two end caps seat firmly; a loose cap lets the cover spin and leaves streaks. Clean immediately with the solvent matched to the coating, because dried epoxy or urethane cannot be removed from the fibers.
Highlights
- 12 in cover fits standard yoke frames
- 1/4 in nap leaves smooth finish on floors and enamels
- Mohair polyester blend holds paint evenly
- Polypropylene core resists solvents and water
- Includes two end caps for secure fit
Specifications
| Brand | WOOSTER |
|---|---|
| Color | Transparent |
Questions about this item
Should I choose the 12" cover or the 18" version for a smooth floor coating job?
The 12" cover suits smaller areas and tighter spaces, while the 18" version covers large floors faster; both share the same 1/4" nap and Mohair/Polyester blend for smooth finishes.
What does the 1/4" nap actually deliver when rolling epoxy or urethane on a concrete floor?
The short 1/4" nap lays down a thin, even film with minimal texture, reducing stipple and helping self-levelling coatings flow out smoothly on smooth substrates.
The core is 1 1/2" polypropylene — will it fit my standard yoke frame and what does that limit?
The 1 1/2" core slides onto any standard yoke frame such as the BR036-18 or BR047-18; the fixed core diameter means you cannot use cage frames designed for larger cores.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
