We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver server PSU with rear fan grille and power connector

WMtec

WMtec Server Power Supply 580W For T410 F5XMD H371J G686J

SKU CH-4MVT-DH6R5

580 W server power supply compatible with PowerEdge T410 and part numbers F5XMD, H371J, G686J

  • 580 W output powers Dell PowerEdge T410 servers reliably
  • Replaces part numbers F5XMD H371J G686J for exact fit
  • Wide-range 100-240 V input works worldwide without switching
  • +12 V rail delivers 48 A for stable component power
  • Auxiliary +12 V line supplies 1.4 A for management functions

WMtec 580W Server PSU for T410

This power supply is built for the Dell PowerEdge T410 server and matches part numbers F5XMD, H371J and G686J. It serves administrators who need a direct replacement unit to restore or maintain power delivery in that specific platform.

Capacity and headroom

The unit delivers a maximum of 580W with a +12V rail rated at 48A and a +12Vaux line at 1.4A. It comfortably handles the T410's standard processor and memory configurations but runs out of headroom when the chassis is filled with high-wattage CPUs, many drives or multiple PCIe cards.

Thermals, noise and power draw

The PSU accepts a wide 100-240V input at 50-60Hz, drawing up to 10A at the low end. In normal server operation the internal fan spins to move heat through the rear exhaust, producing typical rack-level noise that rises only when sustained loads approach the 580W limit.

Highlights

  • 580 W output powers Dell PowerEdge T410 servers reliably
  • Replaces part numbers F5XMD H371J G686J for exact fit
  • Wide-range 100-240 V input works worldwide without switching
  • +12 V rail delivers 48 A for stable component power
  • Auxiliary +12 V line supplies 1.4 A for management functions

Specifications

No published specifications for this item yet.

Questions about this item

Will this 580 W unit fit my existing PowerEdge T410 chassis without modification?

Yes, it is built for the T410 and matches part numbers F5XMD, H371J and G686J.

How can I verify the supply is delivering power correctly once installed?

The server POST and system management firmware will report +12 V rail status and 580 W capacity.

Which cables and connectors are included with the power supply?

Only the PSU module itself is supplied; IEC mains lead and any rail kits are not included.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.