We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U redundant server power supply with gold finger connector and rear exhaust fan

WMtec

WMtec PWS-706P-1R 700W/750W 1U Redundant server power supply 80 Plus Platinum

SKU CH-BWQD-N4WDQ

A 1U redundant server PSU delivering 700W at 100-140V or 750W at 200-240V with 80 Plus Platinum efficiency and gold-finger output

  • 700 W output at 100–140 V input
  • 750 W output at 200–240 V input
  • 80 Plus Platinum efficiency reduces energy waste
  • 1U form factor fits 320 x 54 x 40 mm slots
  • Redundant design with gold-finger 54.5 mm connector

Redundant 1U server power supply

The WMtec PWS-706P-1R is a hot-swap 1U redundant power supply rated at 700W on low-line input and 750W on high-line input. It carries 80 Plus Platinum certification and active PFC with PMBus monitoring. The unit fits standard 1U server chassis and uses a gold-finger output connector.

Suited for dual-PSU servers needing Platinum

This supply targets operators running redundant 1U racks where Platinum efficiency and hot-swap replacement matter. It is not for desktop ATX builds, single-PSU workstations or systems that require a 24-pin motherboard connector. Buyers needing lower-height or non-redundant units should consider other form factors.

Gold-finger 54.5 mm output decides compatibility

The output uses a 54.5 mm wide gold-finger molex interface that mates only with matching backplanes. Verify the server backplane accepts this exact connector before ordering. The AC input auto-ranges 100-140 V at 8.0-6.0 A or 200-240 V at 4.5-3.8 A.

Highlights

  • 700 W output at 100–140 V input
  • 750 W output at 200–240 V input
  • 80 Plus Platinum efficiency reduces energy waste
  • 1U form factor fits 320 x 54 x 40 mm slots
  • Redundant design with gold-finger 54.5 mm connector

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the PWS-706P-1R is delivering 700W or 750W after installation?

The unit reports real-time power draw and status through its PMBus interface; match the reading to the 700W (100-140V) or 750W (200-240V) rating for your input voltage.

What comes with the PWS-706P-1R and what must I source separately?

The supply includes the 1U redundant module with 54.5 mm gold-finger output; an IEC C14 mains lead and a compatible hot-swap backplane are not included.

Should I select the 700W or 750W rating for my rack?

Choose 700W if your PDU provides 100-140V at 8.0-6.0A; choose 750W for 200-240V at 4.5-3.8A — both ratings share the same 320 x 54 x 40 mm form factor.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.