WMtec
WMtec 240W Server Power Supply 0M1C3 W72XN DHVJN H62JR 0TRD3 2P1RD 3RK5T
240 W replacement supply compatible with OptiPlex 3040, 3046, 5040, 7040, Inspiron 3250, 3650, 3656 and Vostro 3250, 3650, 3653 systems
- Delivers 240 W to power compatible desktops
- Wide 100-240 V input works worldwide
- +12 V rails supply up to 16.5 A for stable loads
- 50-60 Hz frequency suits global mains
- Replaces multiple Dell part numbers including 0M1C3 and H62JR
240W Server Power Supply for OptiPlex and Vostro
This 240W unit replaces the power supply in OptiPlex 3040, 3046, 5040 and 7040 desktops as well as Vostro and Inspiron 3250, 3650, 3653 and 3656 models. It delivers +12VA at 16.5A, +12VB at 16A and +12VSB at 2.5A from a 100-240V 50-60Hz input. The part ships under several interchangeable part numbers including 0M1C3, H62JR and 3RK5T.
Suits owners of the listed Dell systems needing
Builders assembling a custom chassis or upgrading to a higher-wattage configuration should look elsewhere because this unit is keyed for the proprietary Dell form factor and connector layout. It does not support ATX mounting or standard 24-pin motherboard power without adapters that are not included.
240W maximum output with dual +12V rails
The supply provides a combined +12V capacity split across two rails rated at 16.5A and 16A respectively, plus a 2.5A standby rail. Verify that your system’s peak 12V draw stays within these limits before ordering.
Highlights
- Delivers 240 W to power compatible desktops
- Wide 100-240 V input works worldwide
- +12 V rails supply up to 16.5 A for stable loads
- 50-60 Hz frequency suits global mains
- Replaces multiple Dell part numbers including 0M1C3 and H62JR
Specifications
No published specifications for this item yet.
Questions about this item
How much heat and power draw should I expect from the 240 W unit running continuously?
The supply draws up to 4 A at 100-240 V and delivers a maximum of 240 W across its +12 V and +12 VSB rails.
Which Dell chassis and motherboard connectors must my system already have for this PSU to fit and power on?
It is built for Inspiron 3250, 3650, 3656, OptiPlex 3040, 3046, 5040, 7040 and Vostro 3250, 3650, 3653 using the listed part numbers.
Will the +12 V rails support the older PCIe cards and drives I plan to keep in the same box?
The two main +12 V rails provide 16.5 A and 16 A respectively, with a 2.5 A standby rail for low-power devices.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



