WMtec
WMtec 180W server power supply PA-1181-3HB D18-180P1A PCH019 7Pin+4Pin+4Pin 85x52x200mm
180W server power supply with 7Pin, 4Pin and 4Pin connectors for ProDesk SFF computers
- 180W output powers ProDesk SFF systems
- 100-240V input works worldwide
- 7Pin+4Pin+4Pin connector fits listed models
- 85x52x200mm size suits compact chassis
- New condition ensures full service life
Target system compatibility
This 180W unit replaces the PA-1181-3HB, PA-1181-3HA, D18-180P1A or PCH019 power supply in ProDesk 280, 600 and 800 G3 as well as 400 G5 small form factor computers. It is intended for IT technicians and system builders who need a direct replacement for those specific models. Builders working on standard ATX cases or other proprietary chassis cannot use this unit.
Connector layout
The output harness provides a 7-pin connector plus two 4-pin connectors, matching the motherboard power headers found in the listed ProDesk SFF systems. No other connector types or pin counts are included, so verification against the original part is essential before installation.
Capacity and headroom
Rated at 180W maximum output, the supply accepts 100-240V AC input at 2.3A across 50-60Hz. It fits the compact 85x52x200mm enclosure used by the target SFF platforms. Systems requiring higher wattage or additional peripheral power connectors will exceed this unit's capability.
Highlights
- 180W output powers ProDesk SFF systems
- 100-240V input works worldwide
- 7Pin+4Pin+4Pin connector fits listed models
- 85x52x200mm size suits compact chassis
- New condition ensures full service life
Specifications
No published specifications for this item yet.
Questions about this item
What does the 180W rating mean for my ProDesk SFF?
The 180W rating is the maximum continuous power this unit can deliver to the ProDesk 280, 600, 800 G3 or 400 G5 small-form-factor system under full load.
What does the 100-240V 50-60Hz input actually cap in practice?
The 100-240V 50-60Hz input allows the PSU to operate on any standard mains supply worldwide without a voltage switch, drawing up to 2.3A at the low end.
Will the 85x52x200mm body with 7Pin+4Pin+4Pin connectors fit my chassis?
The 85 by 52 by 200 millimetre enclosure matches the ProDesk SFF bay, and the 7-pin plus two 4-pin plugs connect directly to the motherboard and drive headers.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



