Wire Cap Connectors 50pcs 2-pin 22–18 AWG 36V 9A UL94V-0 Black
Pack of 50 tool-free 2-pin connectors for 22–18 AWG wire, rated 36 V 9 A with UL94V-0 flame-retardant housing
- ColorBlack
- Standards/CertificationsUL Listed
- Tool-free installation by lifting the handle and pressing to close
- Accepts 22–18 AWG solid or stranded wire without stripping
- UL Listed polycarbonate housing rated UL94V-0 flame retardant
- 36 V and 9 A rating covers LED strips, speakers and low-voltage projects
- Pack of 50 connectors operates from –20 °C to +40 °C
Quick-Connect Wire Caps for Low-Voltage Projects
These 50 black wire cap connectors join solid or stranded wires from 22 to 18 AWG without stripping or tools. Rated for 36 V and 9 A, they suit LED strips, speakers, vehicle wiring and similar low-voltage tasks. The UL 94V-0 polycarbonate housing resists cracking and operates from -20 °C to 40 °C.
Tool-Free Installation with Built-In Test Port
Lift the lever, insert the wire, close the lever and snap the locking buckle to finish. A surface test port allows circuit checks without removing insulation tape. The independent anti-slip plates grip both soft and hard conductors within the 1.5 to 2.1 mm cable OD range for repeatable connections.
Verify Wire Gauge and Voltage Before Ordering
Confirm your wires fall within the 22 to 18 AWG solid or stranded range and that the circuit does not exceed 36 V or 9 A. The connectors accept cable outer diameters of 1.5 to 2.1 mm only. They are not suitable for mains-voltage wiring, high-current loads or cables outside the stated gauge and diameter limits.
Highlights
- Tool-free installation by lifting the handle and pressing to close
- Accepts 22–18 AWG solid or stranded wire without stripping
- UL Listed polycarbonate housing rated UL94V-0 flame retardant
- 36 V and 9 A rating covers LED strips, speakers and low-voltage projects
- Pack of 50 connectors operates from –20 °C to +40 °C
Specifications
| Color | Black |
|---|---|
| Standards/Certifications | UL Listed |
Questions about this item
How can I verify the connection is solid after pressing the locking buckle shut?
Each connector has a built-in test port on its surface so you can probe the circuit without removing any tape or reopening the handle.
What comes in the 50-piece pack and do I need any extra tools or wire?
The pack contains fifty black 2-pin quick-connect caps; the lever-action design needs no tools, but you must supply your own 22–18 AWG solid or stranded wire with an outside diameter of 1.5–2.1 mm.
Which package size — 20, 30 or 50 pieces — best fits a job needing multiple LED strip runs?
Choose the 50-piece pack when the installation calls for numerous parallel connections across several low-voltage LED strip sections.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Unique-Bargains 2-Position Speaker Terminal Block 2 Pcs
- HI - Wire & Cable C…



