Wilton
Wilton MMS-12 12 in Mini F-Clamp 2-1/4 in Deep
A 12-inch mini F-clamp with 2-1/4 inch throat depth and 400 lb clamping force for woodworking, metalworking, welding and automotive tasks
- TypeClamps
- 12 inch clamping capacity for wide workpieces
- 400 lb clamping force holds joints securely
- 2-1/4 inch throat depth reaches past edges
- swivel jaw pads grip angled surfaces
- extruded steel bar resists bending under load
Wilton MMS-12 12 in Mini F-Clamp
The Wilton MMS-12 is a 12 inch mini F-clamp built for automotive, metalworking, plumbing, welding and woodworking tasks. Its extruded steel bar measures 7/16 inch wide by 1/4 inch thick and delivers a clamping force of 400 lb. A 2-1/4 inch throat depth and swivel jaw pads allow secure grip on irregular workpieces. The steel handle provides leverage for tightening in confined spaces.
Check workpiece thickness and reach before ordering
Verify that the 12 inch clamping capacity matches the maximum thickness of the material you intend to hold. Confirm the 2-1/4 inch throat depth is sufficient to reach the clamping point from the edge of the workpiece. Ensure the 7/16 inch bar width and 1/4 inch bar thickness fit within the available clearance of your fixture or assembly. The swivel jaw pads adapt to non-parallel surfaces but require flat contact areas to develop full force.
Sustained load behaviour with 400 lb force
Under continuous tightening the extruded steel bar resists deflection while the swivel pads maintain even pressure across the joint. The 400 lb clamping force holds glued or welded assemblies without creep during cure or cool-down cycles. Steel construction prevents handle slip when vibration occurs in machining or welding operations. The fixed throat depth keeps leverage consistent so repeat set-ups achieve the same force each time.
Highlights
- 12 inch clamping capacity for wide workpieces
- 400 lb clamping force holds joints securely
- 2-1/4 inch throat depth reaches past edges
- swivel jaw pads grip angled surfaces
- extruded steel bar resists bending under load
Specifications
| Brand | WILTON |
|---|---|
| Type | Clamps |
Questions about this item
Does the Wilton MMS-12 come with any accessories or do I need to buy jaw pads separately?
The clamp ships complete with its integral swivel jaw pads; no separate pads or accessories are required for immediate use.
Is the 12 in capacity the only size offered in this MMS-12 model?
The MMS-12 is the 12 in capacity model; other Wilton mini F-clamps carry different model numbers for different reaches.
How much real-world holding power does the 400 lb clamping force deliver on a steel workpiece?
The 400 lb rating is the maximum force the screw mechanism can apply; actual hold depends on workpiece rigidity, jaw contact and operator torque.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
