Wilton
Wilton 1800S-8 8" F-Clamp Regular Duty 4-3/4" Deep
An 8-inch F-clamp with 4-3/4-inch throat depth and 800 lb clamping force for automotive, metalworking, plumbing, welding and woodworking
- TypeClamps
- 8" clamping capacity handles wide workpieces
- 800 lb clamping force secures heavy assemblies
- 4-3/4" throat depth reaches past edges
- Swivel jaw pads grip uneven surfaces
- Extruded steel bar resists bending under load
Wilton 1800S-8 8" F-Clamp
The Wilton 1800S-8 is an 8-inch F-clamp built for regular-duty work. It suits automotive, metalworking, plumbing, welding and woodworking tasks where a 1,800 lb clamping force is useful. The extruded steel bar and steel handle give a rigid frame for consistent pressure.
Installation and common issues
Open the jaws to the 8-inch capacity, position the workpiece against the swivel jaw pad, then tighten the steel handle until the 1,800 lb force holds the part. The swivel pad adapts to angled surfaces so alignment stays true. Excessive force on the 1/2-inch thick bar can bend the rail, and debris on the threads makes the handle harder to turn.
Practical limits of the clamp
The 4-3/4-inch throat depth sets the maximum reach from the bar edge to the jaw face, limiting use on wide panels. The 1,800 lb rating is the peak force for this regular-duty model; heavier structural joints may need a stronger clamp. The fixed 8-inch capacity cannot be extended, so longer workpieces require a different tool.
Highlights
- 8" clamping capacity handles wide workpieces
- 800 lb clamping force secures heavy assemblies
- 4-3/4" throat depth reaches past edges
- Swivel jaw pads grip uneven surfaces
- Extruded steel bar resists bending under load
Specifications
| Brand | WILTON |
|---|---|
| Type | Clamps |
Questions about this item
How can I verify the 800 lb clamping force is holding after I tighten the handle?
The swivel jaw pad should sit flush on the workpiece with no visible gap, and the extruded steel bar must not flex when the handle is fully turned.
What comes with the clamp and what must I source separately?
The clamp ships fully assembled with its steel handle and swivel jaw pad; no extra parts are required for standard clamping tasks.
Which Wilton F-Clamp model should I choose for an 8 inch capacity job?
The 1800S-8 provides exactly 8 in of clamping capacity and 4-3/4 in throat depth for that workpiece size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
