Wiha Tools
Wiha Tools 31328 7 mm 1/4 in Insulated Socket
7 mm insulated socket, 1/4 in drive, 6-point alloy steel, VDE and ASTM F1505 certified
- Typesocket
- MaterialHAWA
- Insulated to 1 000 V per EN/IEC 60900
- 7 mm 6-point socket fits metric fasteners
- 1/4 in drive suits standard ratchets
- Alloy steel with chrome finish resists corrosion
- VDE, ASTM F1505, CSA and NFPA 70E compliant
7 mm 1/4 in Insulated Socket
This Wiha Tools socket fits 7 mm metric fasteners with a 1/4 inch square drive. It is built for professional electricians and maintenance technicians who work on live low-voltage panels. The 6-point profile grips flats securely without rounding corners. Insulation meets ASTM F1505, CSA, EN/IEC 60900, NFPA70E and VDE requirements.
HAWA Alloy Steel Chrome Finish
The socket body uses HAWA alloy steel with a chrome surface that resists corrosion and wipes clean after each job. Insulation is moulded directly onto the steel so there is no loose sleeve to catch or tear. A 1/4 inch drive allows use with standard insulated ratchets and torque wrenches. The tool is not impact rated and is intended for hand operation only.
Replaces Non-Insulated 7 mm Sockets
This piece upgrades any 7 mm socket that lacks certified insulation for electrical work. The change is justified whenever a task requires compliance with EN/IEC 60900 or NFPA 70E on energised equipment. It does not suit impact drivers or applications needing larger drive sizes. Buyers needing 3/8 in or 1/2 in drive compatibility should select a different model.
Highlights
- Insulated to 1 000 V per EN/IEC 60900
- 7 mm 6-point socket fits metric fasteners
- 1/4 in drive suits standard ratchets
- Alloy steel with chrome finish resists corrosion
- VDE, ASTM F1505, CSA and NFPA 70E compliant
Specifications
| Brand | Wiha Tools |
|---|---|
| Type | socket |
| Material | HAWA |
Questions about this item
What does the EN/IEC 60900 standard cover for this 1/4 in drive socket?
The EN/IEC 60900 standard certifies this insulated socket for live working up to 1 000 V AC, with individual testing and marking for electrical safety compliance.
What drive tool fits the 1/4 in square drive on this 7 mm socket?
Any 1/4 in square-drive ratchet, T-handle or extension will engage the socket; the 6-point 7 mm opening then fits metric fasteners without rounding corners.
How do you correctly seat this insulated socket on the fastener?
Align the 6-point 7 mm opening squarely on the nut or bolt, press firmly until the detent engages the drive tool, then apply torque — avoid canted insertion that can crack the insulation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
