WIHA
WIHA 28391 Multi-Bit Screwdriver Phillips Slotted Torx Xeno
Multi-bit screwdriver holds Phillips #1 and #2, slotted 4 mm and 6.5 mm, Torx T15 and T20, plus Xeno tips in a separate case
- TypeScrewdrivers
- Versatile driving across Phillips, Slotted, Torx and Xeno fasteners
- Quick-change holder swaps bits in seconds for continuous work
- Cushion grip reduces hand fatigue during extended use
- Chrome vanadium molybdenum steel bits resist wear on tough jobs
- Separate storage case keeps every bit organised and protected
Multi-Bit Screwdriver 28391
The WIHA 28391 multi-bit screwdriver handles Phillips, slotted, Torx and Xeno fasteners with a single tool. It accepts 1/4 inch drive bits stored in a separate case and uses a quick-change mechanism for rapid tip swaps. The alloy steel shank extends 4 1/2 inches and the cushion grip reduces hand fatigue during extended use. Tip sizes cover #1, #2, 4 mm, 6.5 mm, T15 and T20.
For mixed-head assemblies and maintenance kits
Technicians who encounter Phillips, slotted, Torx and Xeno heads on the same job benefit from the combined bit set. Users needing insulated or ESD-safe tools for live electrical work should look elsewhere because this model is not rated for that protection. Buyers who require a magnetised tip to hold screws in deep recesses will not find that feature here. The separate bit case also means bits are not stored inside the handle.
Quick-change bits with separate storage
The quick-change chuck allows one-handed bit changes without additional tools. Because bits are kept in a separate case, losing individual tips is the most common issue if the case is misplaced. The non-magnetised tips can make vertical or overhead driving awkward until the screw engages. The cushion grip remains secure even with oily or wet hands.
Highlights
- Versatile driving across Phillips, Slotted, Torx and Xeno fasteners
- Quick-change holder swaps bits in seconds for continuous work
- Cushion grip reduces hand fatigue during extended use
- Chrome vanadium molybdenum steel bits resist wear on tough jobs
- Separate storage case keeps every bit organised and protected
Specifications
| Brand | WIHA TOOLS |
|---|---|
| Type | Screwdrivers |
Questions about this item
What size drive must my bits have to fit the 1/4 in holder on the WIHA 28391?
The holder accepts any standard 1/4 in drive bit, so the bits you already own will fit if they share that drive size.
Will the T15 and T20 Torx tips on the WIHA 28391 handle the Torx fasteners I already use?
Yes, the included T15 and T20 Torx tips cover those two common Torx sizes for your existing hardware.
How can I verify the cushion-grip handle and quick-change mechanism are working correctly after I start using the WIHA 28391?
The handle should feel secure and comfortable in hand, and bits should snap in and release cleanly with the quick-change collar.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
