Wiegmann
Wiegmann SC242408 line protection enclosure 24 in H 8 in D 24 in W 14 ga
Carbon-steel wall-mount enclosure measuring 24 in high, 24 in wide and 8 in deep with 14 ga construction, captive plated-steel screws, embossed mounting holes and a usable opening depth of 5.88 in.
- Wall-mount ready with embossed mounting holes
- Secure closure via plated steel captive screws
- NEMA 1 rated carbon steel construction
- cULus and CSA certified for compliance
- 88 in usable depth for component space
Industrial Wall-Mount Enclosure
The Wiegmann SC242408 is a carbon-steel electrical enclosure rated NEMA 1 for indoor line-protection applications. It measures 24 in high by 24 in wide by 8 in deep and is built from 14 ga material with a painted gray finish. The solid cover secures with plated steel captive screws and includes self-tapping mounting hardware.
Suited for Indoor Power Distribution
This enclosure fits contractors and facilities teams needing a UL-listed, CSA-certified box for housing circuit breakers or terminal blocks in dry indoor locations. The embossed mounting holes simplify wall installation while the 5.88 in usable opening depth accommodates standard DIN-rail components. Buyers requiring outdoor-rated protection, larger internal volume, or transparent covers should consider other series.
Capacity and Usable Depth
The 242408 footprint provides ample panel space for multiple breaker rows and wiring gutters within its 5.88 in usable depth. Standard 14 ga construction handles typical industrial vibration and impact loads for wall-mounted gear. Depth constraints appear when fitting deep contactors, multi-row terminal assemblies, or devices needing greater rear clearance than the enclosure allows.
Highlights
- Wall-mount ready with embossed mounting holes
- Secure closure via plated steel captive screws
- NEMA 1 rated carbon steel construction
- cULus and CSA certified for compliance
- 88 in usable depth for component space
Specifications
| Brand | WIEGMANN |
|---|
Questions about this item
What mounting hardware must I already have to install the SC242408 enclosure on a wall?
The enclosure includes self-tapping screws and has embossed mounting holes, so you only need a drill, appropriate drill bits for your wall material, and anchors or fasteners suited to that surface.
Can I reuse my existing 14-gauge carbon-steel backplate inside the 24-inch-wide SC242408 enclosure?
Yes, the interior usable depth is 5.88 inches and the width and height are both 24 inches, so a 14-gauge backplate cut to those outer dimensions will fit and align with the embossed mounting holes.
How do I verify the SC242408 enclosure is properly sealed and grounded after installation?
Tighten the plated steel captive screws until the solid cover seats evenly, confirm the cULus and CSA certification labels are visible inside, and check continuity between the enclosure body and your grounding conductor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
