Wiegmann
Wiegmann SC181808NK NEMA 1 18.0x18.0x8.0 line protection
A carbon-steel NEMA 1 wall-mount enclosure measuring 18.0 by 18.0 by 8.0 inches with screw-on solid cover and ANSI 61 gray finish
- TypeBus Plugs
- NEMA 1 rating protects indoor circuits from dust and contact
- 16-gauge carbon steel body resists impact and corrosion
- ANSI 61 polyester powder finish in gray withstands harsh environments
- Embossed mounting holes and self-tapping screws speed up wall installation
- 0 in height by 18.0 in width by 8.0 in depth fits standard panel layouts
Purpose-built line-protection enclosure
The Wiegmann SC181808NK is a wall-mount carbon-steel enclosure rated NEMA 1 for indoor line-protection and bus-plug applications. It suits installers who need a screw-cover cabinet with plated steel screws and embossed mounting holes for secure equipment housing.
Thermal and power characteristics
The solid cover and ANSI 61 polyester powder finish in gray provide basic indoor environmental protection without active cooling. No fans, vents or power-draw figures are specified, so the unit adds no acoustic or electrical load to the installation.
Included hardware impact
Self-tapping screws ship with the enclosure, eliminating a separate fastener purchase and speeding up wall mounting. The 16-gauge steel body and 7.88 in usable opening depth accommodate standard bus-plug components, while the cULus listing confirms compliance for the intended indoor use.
Highlights
- NEMA 1 rating protects indoor circuits from dust and contact
- 16-gauge carbon steel body resists impact and corrosion
- ANSI 61 polyester powder finish in gray withstands harsh environments
- Embossed mounting holes and self-tapping screws speed up wall installation
- 0 in height by 18.0 in width by 8.0 in depth fits standard panel layouts
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
Questions about this item
How do I mount the SC181808NK enclosure on a wall, and what step is often missed?
Use the embossed mounting holes on the back of the 16-gauge carbon steel body to secure it to the wall; the step often missed is fitting the included self-tapping screws into those holes before hanging the box.
What part of the SC181808NK will need replacement after repeated opening?
The plated steel cover screws are the only wear item; they thread into the screw-on cover and should be replaced if the threads strip or the heads round off during maintenance.
What is the first limitation when fitting components inside the SC181808NK under sustained use?
The usable opening depth of 7.88 in limits the size of internal devices; anything deeper will prevent the solid cover from closing properly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
