Wiegmann
Wiegmann SC151506GNK 15 in H 6 in D 16 ga line protection
Galvanized steel enclosure, 15 in high by 15 in wide by 6 in deep, 16 ga, NEMA 1, UL and CSA listed
- NEMA 1 rated enclosure protects indoor circuits
- 16 ga galvanised steel resists corrosion and impact
- 15 in by 15 in footprint fits standard panels
- 88 in usable depth accepts common breakers
- UL listed and CSA certified for code compliance
Wiegmann SC151506GNK electrical enclosure
The Wiegmann SC151506GNK is a wall-mount electrical enclosure built from 16-gauge galvanised steel. It carries NEMA 1, CSA, cULus and UL Listed ratings for indoor line-protection duties. The solid cover secures with captive plated-steel screws and includes self-tapping screws for quick installation. Embossed mounting holes simplify alignment on the job site.
15-inch square footprint with 6-inch depth
The box measures 15 inches high by 15 inches wide by 6 inches deep, giving a usable opening depth of 5.88 inches. That volume suits terminal blocks, small relay banks or fuse assemblies in commercial and light-industrial panels. It will not accept deeper motor-starter modules or full-width DIN-rail gear that exceeds the 5.88-inch internal clearance.
Galvanised steel with captive-screw cover
Galvanised finish resists corrosion in dry indoor environments without added paint. Captive screws stay with the cover so none are lost during maintenance. Embossed mounting holes let installers hang the box directly on studs or uni-strut without separate brackets. The screw-on cover means tool access is required each time, so frequent-inspection circuits need planning for downtime.
Highlights
- NEMA 1 rated enclosure protects indoor circuits
- 16 ga galvanised steel resists corrosion and impact
- 15 in by 15 in footprint fits standard panels
- 88 in usable depth accepts common breakers
- UL listed and CSA certified for code compliance
Specifications
| Brand | WIEGMANN |
|---|
Questions about this item
Will the 16 ga galvanized steel enclosure fit alongside my existing 15 in panel?
Yes, the SC151506GNK measures 15 in height by 15 in width with a 6 in depth, so it aligns with standard 15 in panel dimensions.
How can I confirm the captive screws are properly sealing the cover after installation?
Tighten the plated steel captive screws until the solid cover sits flush against the gasket; the embossed mounting holes keep the box rigid so the seal stays consistent.
Does the box include the self-tapping screws for wall mounting, or must I buy them separately?
The package includes self-tapping screws for mounting; no additional hardware is required for a standard wall installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
