Wiegmann
Wiegmann SC101006G enclosure 10 in H 6 in D 10 in W line protection
Galvanised-steel wall-mount enclosure with captive screws, 10 in high by 10 in wide by 6 in deep, NEMA 1 rated and cULus listed
- NEMA 1 rating protects indoor circuits
- Galvanised steel body resists corrosion
- 16 ga thickness adds structural rigidity
- Embossed mounting holes simplify wall installation
- Captive plated screws secure the cover
Wall-mount enclosure for indoor electrical
The Wiegmann SC101006G is a NEMA 1 rated enclosure built from 16 gauge galvanized steel for indoor line protection. It measures 10 inches high, 10 inches wide and 6 inches deep with a usable opening depth of 5.88 inches. The solid cover fastens with plated steel captive screws and includes self-tapping mounting hardware. CSA certified and cULus listed, it suits commercial or residential panel builds.
Sustained protection in continuous indoor service
Galvanized finish resists corrosion during long-term exposure to humidity and temperature cycling inside mechanical rooms. The 16 gauge steel walls maintain structural rigidity when fully populated with breakers or terminal blocks. Embossed mounting holes keep the box secure on studs or concrete without deformation over years of thermal expansion. Screw-on cover retains its seal without latch fatigue.
Passive thermal management with no added noise
No fans or active cooling are present; heat dissipates through the steel walls by natural convection. The solid cover and gasket-free screw closure produce zero operational noise. Power draw is limited to the devices mounted inside the enclosure itself. Silver galvanized exterior reflects ambient radiant heat in bright utility spaces.
Highlights
- NEMA 1 rating protects indoor circuits
- Galvanised steel body resists corrosion
- 16 ga thickness adds structural rigidity
- Embossed mounting holes simplify wall installation
- Captive plated screws secure the cover
Specifications
| Brand | WIEGMANN |
|---|
Questions about this item
Does the galvanised steel enclosure generate noticeable heat or noise during continuous operation?
The SC101006G is a passive steel enclosure with no fans or active components, so it produces no noise and adds no measurable heat to the installed equipment.
What mounting hardware must I already have to install this wall-mount enclosure?
The box includes self-tapping screws for the cover; you will need your own wall anchors or lag bolts suited to the mounting surface.
Will the 16-gauge steel box and 5.88-inch usable depth accept my existing DIN-rail modules and terminal blocks?
The interior depth of 5.88 in and embossed mounting holes accommodate standard DIN rails and terminal blocks designed for NEMA 1 enclosures of this size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
