Wiegmann
Wiegmann RSC151808G line protection enclosure 18 in H 15 in W 8 in D
Galvanised steel enclosure rated NEMA 3R, 18 in high by 15 in wide by 8 in deep, with padlockable hasp and screw-on solid cover
- NEMA 3R rating protects against rain and sleet
- 16-gauge galvanised steel resists corrosion and impact
- Padlockable hasp secures internal components from tampering
- cULus and CSA certification confirms safety compliance
- 18×15×8 in dimensions suit wall-mount line-protection needs
Galvanised steel enclosure for line protection
The Wiegmann RSC151808G is a NEMA 3R rated enclosure built from 16 gauge galvanised steel with a silver finish. It is designed for wall mounting and suits indoor or outdoor line protection installations where a padlockable hasp and solid cover are required.
18 by 15 by 8 inch internal volume
The enclosure provides an 18 inch height, 15 inch width and 8 inch overall depth, yielding a 7.88 inch usable opening depth for components. This capacity accommodates typical circuit breaker and line protection assemblies, though very deep devices or dense wiring looms may approach the internal limit.
Passive cooling with screw on cover
The solid screw on cover seals the enclosure without fans, so heat dissipation relies on natural convection through the galvanised steel walls. The padlockable handle adds security without restricting airflow, and the unit draws no power itself, keeping noise at zero during normal operation.
Highlights
- NEMA 3R rating protects against rain and sleet
- 16-gauge galvanised steel resists corrosion and impact
- Padlockable hasp secures internal components from tampering
- cULus and CSA certification confirms safety compliance
- 18×15×8 in dimensions suit wall-mount line-protection needs
Specifications
| Brand | WIEGMANN |
|---|
Questions about this item
Will the 18 in H by 15 in W enclosure fit alongside my existing 16 ga galvanised steel junction boxes on the same wall?
Yes, the enclosure shares the same 16 ga galvanised steel construction and wall-mount design, so it aligns with similar NEMA 3R boxes you already have installed.
How can I verify the RSC151808G is properly sealed and certified after mounting?
Check that the screw-on solid cover sits flush, the padlock hasp engages cleanly, and the CSA, cULus and UL Listed labels are visible on the galvanised finish.
Does the box include mounting hardware or must I buy lag bolts separately?
The package includes the enclosure screws; separate lag bolts or anchors for the wall surface are not supplied and must be sourced to match your mounting substrate.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
