Wiegmann
Wiegmann RSC101004G line protection 10 in H 4 in D 16 ga
Galvanised-steel wall-mount enclosure rated NEMA 3R, 10 inches high by 10 inches wide by 4 inches deep with padlockable handle and clamp closure
- NEMA 3R rating protects against rain and sleet
- 16-gauge galvanised steel resists corrosion and impact
- Padlockable hasp secures internal components
- CSA, cULus and UL listings confirm code compliance
- 10-by-10-inch footprint with 3.88-inch usable depth fits standard wall-mount layouts
Galvanised Steel Enclosure 10 in H
The Wiegmann RSC101004G is a wall-mountable electrical enclosure built from 16 ga galvanised steel with a silver finish. It measures 10 in high, 10 in wide and 4 in deep, providing a usable opening depth of 3.88 in. The solid cover fastens with clamps and screws and includes a padlockable handle for secure access. It carries CSA, cULus and UL Listed ratings and meets NEMA 3R requirements.
Indoor or Sheltered Outdoor Installations
This enclosure suits installers who need a compact, lockable housing for junction boxes, terminal strips or small control gear in dry or rain-protected locations. The NEMA 3R rating covers falling rain and sleet but not hose-directed water, submersion or heavy dust, so it is not appropriate for wash-down areas, marine decks or dusty industrial floors. Buyers needing a larger internal volume or a transparent cover should consider other models.
Wall Mounting With Standard Hardware
Mounting holes in the back allow direct fastening to a flat surface using common screws or bolts; the package includes the cover screws. The 16 ga steel is rigid enough for typical panel loads but can bow if heavy components are concentrated without internal stiffeners. Ensure the mounting surface is level to prevent door misalignment and maintain the gasket seal against driven rain.
Highlights
- NEMA 3R rating protects against rain and sleet
- 16-gauge galvanised steel resists corrosion and impact
- Padlockable hasp secures internal components
- CSA, cULus and UL listings confirm code compliance
- 10-by-10-inch footprint with 3.88-inch usable depth fits standard wall-mount layouts
Specifications
| Brand | WIEGMANN |
|---|
Questions about this item
What wall-mount hardware must I already have to install this 10-inch-high galvanized steel enclosure?
The enclosure is designed for wall mounting with its own included screws, so you only need a drill, suitable anchors for your wall material, and a level to secure the 16-gauge steel body.
Will my existing 3.88-inch-deep DIN-rail components fit inside the usable opening of this RSC-G series box?
Yes, the usable opening depth is 3.88 in, matching the internal space of this NEMA 3R rated enclosure, so standard DIN-rail devices within that depth will install without interference.
How can I verify the clamps and padlockable handle are sealing the cover correctly after I close it?
Engage both screw clamps fully and confirm the solid cover sits flush against the galvanized flange; the padlockable handle should then accept a lock shackle through its hasp, proving the cover is secured.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
