Wiegmann
Wiegmann RSC081006G Enclosure 10 in H 8 in W 6 in D 16 ga line protection
Galvanised-steel wall-mount enclosure rated NEMA 3R with padlockable clamps, 10 in high, 8 in wide, 6 in deep, 16 ga construction, UL and CSA listed
- NEMA 3R rated for outdoor rain protection
- 16-gauge galvanised steel resists corrosion
- Padlockable hasp secures internal components
- CSA, cULus and UL listed for code compliance
- 88 in usable depth fits standard devices
16-Gauge Galvanized Steel Enclosure
The Wiegmann RSC081006G is a NEMA 3R rated enclosure built from 16-gauge galvanized steel. It provides line protection for electrical components in indoor or outdoor settings. The silver finish resists corrosion while the solid cover secures with clamps and screws. Wall-mount provisions allow direct installation on flat surfaces.
Installers needing padlockable security
This unit suits electricians and maintenance teams who require a lockable enclosure for junction boxes or control gear. The padlockable handle prevents unauthorised access to live parts. Buyers who need a transparent cover for visual inspection should look at a different model. It is not intended for submersible or hazardous-location applications.
10-inch height by 8-inch width by 6-inch depth
The enclosure measures 10 inches high, 8 inches wide and 6 inches deep with a usable opening depth of 5.88 inches. These external dimensions determine whether your terminal blocks, breakers or relays will fit inside. Verify the internal clearance against your component layout before ordering. The 16-gauge steel construction adds rigidity for wall-mounted installations.
Highlights
- NEMA 3R rated for outdoor rain protection
- 16-gauge galvanised steel resists corrosion
- Padlockable hasp secures internal components
- CSA, cULus and UL listed for code compliance
- 88 in usable depth fits standard devices
Specifications
| Brand | WIEGMANN |
|---|
Questions about this item
What mounting hardware is included so the 10 in H enclosure can be secured to the wall?
The enclosure ships with the required mounting screws for wall installation.
Can the 16 ga galvanised steel box accept standard 1/2 in or 3/4 in conduit knockouts without modification?
The solid cover and clamp closure leave the sides intact; conduit entries must be drilled or punched on site.
How do I verify the padlockable hasp is aligned and the clamps seal the NEMA 3R rating after wiring?
Close the cover, engage both clamps, insert a padlock through the hasp — if the hasp holes line up and the gasket compresses evenly, the seal is correct.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
