Wiegmann
Wiegmann RSC080806 Bus Plugs 8×8×6 in 16 ga ANSI 61 Gray
A carbon-steel NEMA 3R enclosure with a solid screw-on cover, padlockable hasp and ANSI 61 gray powder coat
- TypeBus Plugs
- NEMA 3R rating protects against rain and sleet
- 16-gauge carbon steel resists impact and corrosion
- ANSI 61 powder coat finish withstands harsh environments
- Padlockable hasp secures internal components
- CSA and cULus listings confirm safety compliance
Enclosure for Electrical Protection
The Wiegmann RSC080806 is a carbon steel enclosure rated NEMA 3R for outdoor use. It suits installers who need a wall-mounted housing for bus plugs or similar components. The solid cover uses a screw-on design with a padlockable handle for secure access. CSA, cULus and UL listings confirm compliance with North American safety standards.
Sustained Environmental Performance
The ANSI 61 gray polyester powder coating resists corrosion during long exposure to rain, sleet or hose-directed water. Sixteen-gauge steel maintains structural rigidity across temperature cycles without warping. The padlock hasp and screw-fastened cover keep the seal intact under vibration from nearby equipment. Internal components stay protected during continuous duty in harsh conditions.
Mounting Practicality and Daily Use
Pre-drilled holes allow direct wall mounting with standard hardware. The usable opening depth of 5.88 in accommodates bus plugs while leaving room for wire bending. Included screws reduce extra trips to the supply house. The padlockable handle lets maintenance crews lock out power quickly during service. Gray finish matches common industrial panels for a uniform appearance.
Highlights
- NEMA 3R rating protects against rain and sleet
- 16-gauge carbon steel resists impact and corrosion
- ANSI 61 powder coat finish withstands harsh environments
- Padlockable hasp secures internal components
- CSA and cULus listings confirm safety compliance
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
Questions about this item
Does the 16 ga carbon-steel enclosure with ANSI 61 powder coating dissipate heat adequately when the bus plug runs continuously?
The 16 ga carbon-steel body and ANSI 61 powder-coated finish are designed for NEMA 3R wall-mount use; heat dissipation depends on the installed breaker load and ambient conditions.
What mounting hardware must I already have to install the RSC080806 enclosure on a wall?
The enclosure includes the required screws; you only need to supply suitable wall anchors or bolts for the mounting surface.
Will my existing padlock fit the hasp on this 8 in × 8 in × 6 in enclosure?
The padlock hasp accepts standard shackle diameters; verify your padlock shackle size against the hasp opening before installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
