Wiegmann
Wiegmann RHC080806 NEMA 3R 8.0×8.0×6.0 in line protection
Wall-mount carbon-steel enclosure rated NEMA 3R with padlockable latch and ANSI 61 powder coat
- TypeBus Plugs
- MaterialHAWA
- NEMA 3R rating protects against rain and sleet
- Carbon steel body with ANSI 61 powder coat resists corrosion
- Padlockable draw latch secures the hinged cover
- External mounting plates simplify wall installation
- CSA certified, cULus and UL listed for code compliance
Wiegmann RHC080806 NEMA 3R enclosure
The Wiegmann RHC080806 is a wall-mount enclosure rated NEMA 3R for indoor or outdoor use. It is built from 16 ga carbon steel with an ANSI 61 powder-coated gray finish. The unit measures 8.0 in height, 8.0 in width and 6.0 in depth, providing a usable opening depth of 5.88 in. It suits installers needing a compact, padlockable housing for electrical components.
Replaces open or lower-rated boxes
This enclosure upgrades from unrated junction boxes or NEMA 1 cabinets when rain, sleet or dripping water protection is required. The hinged cover with padlockable draw latch and external mounting plates speeds installation on flat walls. The jump is worth it when a CSA Certified, cULus and UL Listed rating is specified for the project.
Verify mounting space and panel fit
Confirm the 8.0 by 8.0 in footprint and 6.0 in depth clear the intended wall area before ordering. Check that the interior panel 6C754 matches your component layout and that the 5.88 in usable depth accommodates your devices. Ensure the padlock hasp meets site security requirements.
Highlights
- NEMA 3R rating protects against rain and sleet
- Carbon steel body with ANSI 61 powder coat resists corrosion
- Padlockable draw latch secures the hinged cover
- External mounting plates simplify wall installation
- CSA certified, cULus and UL listed for code compliance
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
| Material | HAWA |
Questions about this item
What wall-mount hardware does the 8.0 in enclosure need?
The carbon-steel body includes external mounting plates; secure it with four bolts or lag screws sized for the 16 ga metal gauge.
Which step is often missed when fitting the 6C754 interior panel?
Install the panel before wiring so the 5.88 in usable opening depth stays clear; the hinged cover must close without pinching cables.
How do I maintain the ANSI 61 powder-coated finish on the gray steel?
Inspect the coating annually for scratches; touch up any bare metal with matching ANSI 61 paint to keep the NEMA 3R rating intact.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
