Wiegmann
Wiegmann BN4080604CHSS 304 Stainless Steel Enclosure 16 ga NEMA 12 13 4 4X IP66
A 304 stainless-steel enclosure rated NEMA 12, 13, 4, 4X and IP66 with a hinged solid cover, screw-down clamps and a seamless poured-in-place gasket
- TypeBus Plugs
- MaterialHAWA
- 304 stainless steel resists corrosion in harsh environments
- NEMA 12, 13, 4, 4X ratings protect against dust, water and oil
- IP66 rating ensures powerful water-jet protection
- 16-gauge steel with seamless polyurethane gasket seals out contaminants
- Hinged screw-down clamps allow quick, secure access for maintenance
Industrial Stainless Steel Enclosure
The Wiegmann BN4080604CHSS is a 304 stainless steel enclosure built for industrial environments. It carries NEMA 12, 13, 4 and 4X ratings plus IP66 ingress protection. The 16 gauge construction with a seamless poured polyurethane gasket seals out dust, water and oil. External mounting plates allow direct wall installation.
Thermal and Environmental Protection
The solid hinged cover uses screw-down clamps to maintain a consistent seal during normal operation. The 304 stainless material resists corrosion in wash-down or chemical exposure scenarios. No active cooling or power draw is required from the enclosure itself. The smooth grained finish simplifies cleaning in regulated facilities.
Included Panel and Hardware
An interior panel 3A926 ships installed for component mounting. Stainless steel screws and clamps are supplied to secure the cover without additional hardware. The poured-in-place gasket eliminates separate gasket installation steps. The unit is restricted from sale in certain states per supplier data.
Highlights
- 304 stainless steel resists corrosion in harsh environments
- NEMA 12, 13, 4, 4X ratings protect against dust, water and oil
- IP66 rating ensures powerful water-jet protection
- 16-gauge steel with seamless polyurethane gasket seals out contaminants
- Hinged screw-down clamps allow quick, secure access for maintenance
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
| Material | HAWA |
Questions about this item
How is the 16 ga 304 stainless steel enclosure mounted to a wall?
Use the external mounting plates with the included stainless steel screws; the step often missed is tightening the screwdown clamps evenly so the poured-in-place polyurethane gasket seats uniformly for the IP66 seal.
What part of the enclosure will need replacement after extended service?
The seamless polyurethane gasket can degrade over time; if the IP66 rating must be maintained, replace the gasket and verify clamp torque on the hinged cover.
Which rating limit is reached first during continuous outdoor exposure?
The NEMA 4X and IP66 ratings define the ingress limit; sustained spray or wash-down will test the gasket and clamp seal before the 304 stainless material shows corrosion.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
