Wiegmann
Wiegmann B060604SC NEMA 12, 13 6.0x6.0x4.0 in Wall Mount line protection
A carbon-steel wall-mount enclosure rated NEMA 12/13 with screw-on cover, captivated screws, neoprene gasket and 14-gauge construction
- TypeBus Plugs
- MaterialHAWA
- NEMA 12 and 13 rated for dust and water protection
- Carbon steel body with ANSI 61 powder coat resists corrosion
- Captive cover screws stay attached during maintenance
- External mounting plates simplify wall installation
- cULus and CSA certified for code compliance
Enclosure for Bus Plug Applications
The Wiegmann B060604SC is a wall-mount enclosure rated NEMA 12 and 13 for indoor protection against dust, dirt and non-corrosive liquids. It houses bus plugs in a carbon steel body finished in ANSI 61 gray powder coat. The 6.0 in height by 6.0 in width by 4.0 in depth footprint suits compact industrial control panels. Captivated cover screws and a neoprene gasket maintain the seal during routine access.
Upgrade from Open or Lower-Rated Boxes
This unit replaces unrated junction boxes or NEMA 1 enclosures when the environment demands protection from settling airborne contaminants and oil or coolant seepage. The jump is worth it when equipment must stay operational in machining areas or process lines where splashing occurs. CSA certified and cULus listed construction meets code requirements that basic boxes cannot satisfy. The 14 ga steel and screw-on solid cover add mechanical rigidity over lighter alternatives.
Sustained Load Behaviour in Contaminated Air
Under continuous operation the powder-coated carbon steel resists corrosion from persistent humidity and chemical vapours. The neoprene gasket retains compression set resistance across temperature cycles, keeping the NEMA 12/13 seal intact without frequent retightening. Captivated screws prevent loss during repeated inspections, reducing downtime. The 3.88 in usable opening depth accommodates standard bus plug profiles while maintaining internal clearances for heat dissipation.
Highlights
- NEMA 12 and 13 rated for dust and water protection
- Carbon steel body with ANSI 61 powder coat resists corrosion
- Captive cover screws stay attached during maintenance
- External mounting plates simplify wall installation
- cULus and CSA certified for code compliance
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
| Material | HAWA |
Questions about this item
What wall space is needed to mount the 6.0 in high by 6.0 in wide enclosure?
The enclosure measures 6.0 in height, 6.0 in width and 4.0 in depth, so allow at least that footprint plus clearance for the external mounting plates and screw access.
Which step is often missed when securing the captivated cover screws on the screw-on cover?
Tighten each captivated cover screw evenly to compress the neoprene gasket uniformly; skipping the cross-pattern torque lets the gasket leak and breaks the NEMA 12, 13 seal.
When should the neoprene gasket on the 14 ga carbon steel enclosure be inspected or replaced?
Inspect the neoprene gasket whenever the cover is removed; replace it if it shows cracking, compression set or chemical damage to maintain the NEMA 12, 13 rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
