We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Wet Sounds

Wet Sounds XS-65i-S-RGB 6.5" car speaker pair 60 W RMS

SKU CH-A9G2-PEMD1

Two pairs of 6.5 inch coaxial speakers with integrated RGB LED tweeters, 60 W RMS each, 4 ohm impedance, 40 Hz to 20 kHz response

  • TypeSpeaker
  • Speaker Size6.5"
  • Integrated RGB LED tweeter cup creates customisable cabin lighting
  • 60 W RMS per speaker delivers clear, powerful audio
  • 40 Hz – 20 kHz range covers deep bass to crisp highs
  • 89 dB sensitivity produces strong output with modest amplifier power
  • 6 in mounting depth fits tight door and dash spaces

Marine-grade audio with RGB accent lighting

This bundle delivers two pairs of Wet Sounds XS-65i-S-RGB 6.5" coaxial speakers designed for marine and powersport installations. Each driver handles 60 W RMS and 200 W peak power with a 4-ohm impedance. The injection-moulded composite cone and proprietary rubber surround are built to withstand moisture and UV exposure. Integrated RGB LEDs in the tweeter cup add customisable illumination.

Direct replacement for factory 6.5" locations

The 5.0-inch cutout and 2.6-inch mounting depth match common OEM openings, so the upgrade fits without enlarging holes. The jump is worth it when the original speakers lack power handling or weather resistance. Frequency response spans 40 Hz to 20 kHz at 89 dB sensitivity, providing louder, cleaner output from the same amplifier power.

Works with 12 V RGB controllers for colour control

The LED leads connect to 12 V for fixed red, blue or green, or pair with an external RGB controller for unlimited colours, flash and fade via RF remote. Silver grilles and composite cones complement open-cockpit aesthetics. Each pair weighs 6 lbs and measures 6.8 inches in diameter with the grille. No passive crossovers or separate tweeter mounts are required.

Highlights

  • Integrated RGB LED tweeter cup creates customisable cabin lighting
  • 60 W RMS per speaker delivers clear, powerful audio
  • 40 Hz – 20 kHz range covers deep bass to crisp highs
  • 89 dB sensitivity produces strong output with modest amplifier power
  • 6 in mounting depth fits tight door and dash spaces

Specifications

TypeSpeaker
Speaker Size6.5"

Questions about this item

What cut-out diameter does each 6.5" speaker require for mounting?

Each speaker needs a 5.0 inch (127 mm) hole cut-out and has a mounting depth of 2.6 inches (60.04 mm) behind the mounting surface.

How do I connect the RGB LED in the tweeter cup for single-colour or multi-colour operation?

Apply 12 V to the LED leads for a fixed red, green or blue, or connect the leads to a compatible RGB controller to enable colour mixing, flashing and fading via the RF remote.

When should the rubber spider and surround be inspected or replaced?

Inspect the rubber spider and surround annually for cracking or loss of elasticity; replace them if the cone movement becomes uneven or distortion appears at moderate volumes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.