We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black 10-inch coaxial marine speakers with cast aluminium frames and RGB LED tweeter glow

Wet Sounds

Wet Sounds REVO 10CX 10" Coaxial Speakers Black SW Grill (pair)

SKU CH-ZGN8-QP6RG

Pair of 10-inch marine coaxial speakers delivering 350 W RMS with titanium tweeters, rubber spider suspension, RGB LED glow kit and cast-aluminium frames

  • TypeSpeaker
  • Speaker Size10"
  • ColorBlack
  • 350 watts RMS power delivers loud, clear sound
  • 25-inch titanium tweeter reproduces crisp high-frequency detail
  • Marine-grade cast aluminium frame resists corrosion in saltwater environments
  • Waterproof rubber spider prevents saturation and dry rot
  • RGB LED glow kit adds customisable colour lighting

Marine-grade coaxial speakers

Wet Sounds REVO 10CX 10-inch coaxial speakers are built for marine and outdoor installations where moisture, salt and UV exposure destroy standard drivers. The pair uses a cast-aluminium frame, injection-moulded composite cone and a 1.25-inch titanium dome tweeter to deliver 350 watts RMS power handling at 2-ohm impedance. They suit boat owners and off-road enthusiasts who need loud, clear output in harsh environments.

Two-ohm load and crossover limits

The 2-ohm nominal impedance demands an amplifier stable at that load; many marine head units and entry-level amps cannot drive it cleanly. The built-in 12 dB audiophile crossover uses air-core inductors and mil-spec components with integrated tweeter protection, fixing the crossover point and slope so bi-amping or external passive networks are not possible. Frequency response spans 35 Hz to 22 kHz at 90 dB sensitivity.

Flush-mount installation notes

Each speaker requires a 4.72-inch mounting depth and an 11.02-inch cut-out diameter with the grill fitted, weighing 29.8 pounds for the pair. The rubber spider and thermoformed surround resist water saturation and dry rot, but the cast frame must seat flat against a rigid baffle to avoid air leaks that degrade bass. RGB LED tweeter glow kit wiring adds a second conductor pair that must be routed and sealed separately.

Highlights

  • 350 watts RMS power delivers loud, clear sound
  • 25-inch titanium tweeter reproduces crisp high-frequency detail
  • Marine-grade cast aluminium frame resists corrosion in saltwater environments
  • Waterproof rubber spider prevents saturation and dry rot
  • RGB LED glow kit adds customisable colour lighting

Specifications

TypeSpeaker
Speaker Size10"
ColorBlack

Questions about this item

Which version of the Wet Sounds REVO 10CX should I choose for a marine installation?

This model is the REVO 10CX with black sport grille and RGB LED tweeter glow kit included. It is sold as a matched pair of 10-inch coaxial speakers rated at 350 watts RMS and 700 watts peak, with 2-ohm impedance.

What does the 350-watt RMS rating mean once the speakers are installed in my boat?

The 350-watt RMS figure is the continuous power each speaker can handle safely. With 90 dB sensitivity at one watt and one metre, they produce strong output from typical marine amplifiers without needing extreme gain settings.

How does the 2-ohm impedance affect what amplifier I can use?

The 2-ohm nominal impedance lets the speakers draw more current from a compatible amplifier, delivering up to 350 watts RMS per channel. Ensure your amplifier is stable at 2 ohms stereo or 4 ohms bridged to match this load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.