We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two pairs of white 6.5 inch coaxial speakers with RGB LED tweeter cups

Wet Sounds

Wet Sounds RECON 6 XW-W 6.5" 60W RMS RGB Coaxial Speakers White Grilles

SKU CH-V6K8-KSVB8

Two pairs of 6.5-inch coaxial speakers deliver 60 watts RMS with RGB lighting and waterproof connectors

  • TypeSpeaker
  • 60W RMS power delivers strong output for marine audio
  • RGB LED illumination in tweeter cup adds customisable lighting
  • 40Hz–20kHz frequency response covers full audible range
  • Waterproof Delphi connectors resist moisture and corrosion
  • 6in mounting depth fits shallow installation spaces

Two pairs of 6.5" coaxial speakers

This set supplies two pairs of RECON 6 XW-W 6.5 inch coaxial speakers rated at 60 watts RMS and 120 watts peak each. They are built for marine and powersport installations where consistent output and weather resistance matter. The white grilles and composite cones match open-cockpit aesthetics.

89 dB sensitivity at 1 watt / 1 metre

At 89 dB sensitivity the speakers reach usable volume with modest amplifier power, keeping current draw and heat low during extended runs. The 4 ohm impedance presents an easy load for most marine amplifiers. The Santoprene surround and rubber magnet boot resist UV and moisture without adding thermal load.

Waterproof Delphi connectors for audio and RGB

Each speaker includes a 2 pin waterproof Delphi connector for the audio signal and a 4 pin waterproof Delphi connector for the RGB lighting circuit, both shared with the REVO line. The injection moulded tweeter cup glows through the translucent material when the RGB circuit is active. Buyers who need a different grille colour or a non‑RGB coaxial model cannot use this kit.

Highlights

  • 60W RMS power delivers strong output for marine audio
  • RGB LED illumination in tweeter cup adds customisable lighting
  • 40Hz–20kHz frequency response covers full audible range
  • Waterproof Delphi connectors resist moisture and corrosion
  • 6in mounting depth fits shallow installation spaces

Specifications

TypeSpeaker

Questions about this item

How do I wire the 2-pin speaker connector and 4-pin RGB connector during installation?

Connect the 2-pin waterproof Delphi plug to the speaker output and the 4-pin Delphi plug to the RGB controller; both lock with a click, so the step people miss is fully seating each latch before tightening the grille.

What parts will need replacement first on these RECON 6 XW-W speakers?

The Santoprene spider and surround resist UV and moisture, so the aluminium dome tweeter is the component most likely to require service after extended high-output use.

At what power level does the 60 W RMS thermal limit appear during sustained playback?

Continuous operation above 60 watts RMS will hit the voice-coil thermal ceiling first, triggering protection before the 120 W peak rating is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.