We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Wet Sounds amplifier wiring kit with red and black power cables, distribution block, and fuse holders

Wet Sounds

Wet Sounds Rear Battery 2 Amplifier Power Kit 20' 1/0 AWG 10' 4 AWG 25' Remote Turn On 300A ANL 150A Mini ANL

SKU CH-X2BN-C0HX4

Complete amplifier wiring kit for rear-mounted systems with 20-foot 1/0 AWG and 10-foot 4 AWG power cables plus 25-foot remote turn-on wire

  • TypeAmplifiers
  • 20 ft 1/0 AWG cable delivers high-current power to rear-mounted amps
  • 10 ft 4 AWG wire handles secondary amplifier feeds with low resistance
  • 25 ft remote turn-on lead reaches distant amp locations easily
  • 300 A ANL and 150 A mini ANL fuses protect every power circuit
  • Marine-grade tinned copper meets CEA-2015 and BC-5W2 standards for corrosion resistance

Rear-Battery Amplifier Kit

This Wet Sounds kit supplies every cable and fuse needed to power up to two amplifiers mounted far from the front battery. It is built for installers who need a complete, marine-grade wiring solution in one box.

Replaces Front-Mount Kits

The longer 20-foot 1/0 AWG runs and 25-foot remote wire cover distances that standard front-battery kits cannot reach. Upgrading makes sense when amplifier location demands heavier gauge and extra length for clean voltage delivery.

Straightforward Install With One Catch

Colour-coded power and ground wires plus the Big Block distribution block simplify routing and termination. The main risk is under-sizing the 300 A ANL fuse for combined amplifier draw, so verify total current before final connection.

Highlights

  • 20 ft 1/0 AWG cable delivers high-current power to rear-mounted amps
  • 10 ft 4 AWG wire handles secondary amplifier feeds with low resistance
  • 25 ft remote turn-on lead reaches distant amp locations easily
  • 300 A ANL and 150 A mini ANL fuses protect every power circuit
  • Marine-grade tinned copper meets CEA-2015 and BC-5W2 standards for corrosion resistance

Specifications

TypeAmplifiers

Questions about this item

How much 1/0 AWG power and ground wire is included for the main battery run?

The kit supplies 20 feet of 1/0 AWG power and ground wire for the primary connection from the battery to the distribution block.

What is the correct sequence for connecting the fuses and distribution block during installation?

Mount the 300A ANL fuse holder on the 1/0 AWG wire near the battery, route the wire to the Big Block distribution block, then install the 150A Mini ANL fuses into the block before attaching the 4 AWG leads to the amplifiers.

Which fuses in the kit are replaceable and what are their ratings?

Both the 300A ANL fuse and the two 150A Mini ANL fuses are user-replaceable; spares of each rating should be kept on hand for future maintenance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.