Westward
Westward Straight Flute Hand Tap #6-32 UNC 3 Flutes
Creates #6-32 UNC threads with a 2 in carbon steel straight-flute tap featuring three flutes and a 0.69 in thread length
- TypeHole, Drill, Bore & Wire Gauges
- Cuts #6-32 UNC threads with straight-flute design
- Taper lead eases starting in through-holes
- 3 flutes clear chips for smoother cutting
- Carbon steel construction resists wear in general use
- Bright uncoated finish suits low-speed hand tapping
Westward #6-32 UNC Straight Flute Tap
This Westward straight flute hand tap cuts #6-32 UNC threads in through holes or blind holes. It is made from carbon steel with a bright uncoated finish and a right-hand thread direction. The taper chamfer helps start the thread cleanly. It suits maintenance, repair and light production work where a general-purpose tap is required.
Installing the tap in a holder
Secure the tap in a suitable tap wrench or holder aligned with the drilled hole. Apply steady forward pressure while turning clockwise to engage the taper lead. Use cutting fluid to reduce friction and improve thread quality. The most common issue is tap breakage caused by misalignment, insufficient lubrication or forcing the tool through a hole that is too small.
Check the drilled hole size before ordering
Verify that the tapped hole matches the #6-32 UNC specification and that the drilled hole diameter is correct for the thread pitch. Confirm the workpiece material is compatible with carbon steel taps. The overall length is 2 in with a thread length of .69 in, so ensure the hole depth and tool clearance are adequate for the application.
Highlights
- Cuts #6-32 UNC threads with straight-flute design
- Taper lead eases starting in through-holes
- 3 flutes clear chips for smoother cutting
- Carbon steel construction resists wear in general use
- Bright uncoated finish suits low-speed hand tapping
Specifications
| Brand | Westward |
|---|---|
| Type | Hole, Drill, Bore & Wire Gauges |
Questions about this item
How can I confirm the #6-32 UNC tap is cutting threads correctly after I start it?
Check that the threads engage smoothly and measure the thread length against the 0.69 in specification using a thread gauge.
What comes with the Westward straight flute hand tap and what must I supply separately?
The package includes the carbon steel, bright finish tap only; you must provide a compatible tap handle or wrench and cutting fluid.
Which thread limit or class of fit should I select for a standard #6-32 UNC application?
This tap is manufactured to Class of Fit 1B with no thread limit specified, making it suitable for general-purpose threading.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
