We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminum inverter unit, 4.25 by 2.56 inches, two outlets, includes battery clips

Westward

Westward Inverter Aluminum 600 W 45NC48

SKU CH-JB64-647Q0

Converts 10.5 to 15 V DC to 110 to 125 V AC with 600 W nominal and 1,200 W peak output through two standard outlets in an aluminium case

  • Delivers 600 W continuous AC power from a 10.5–15 V DC source
  • Handles 1 200 W peak surges for motor start-up loads
  • Two standard 3-prong outlets let you run multiple devices
  • Rugged aluminium case dissipates heat in tight spaces
  • Includes two battery clips for quick 12 V connection

600 W Aluminum Inverter for Mobile Power

This Westward inverter converts 10.5 to 15 V DC from a vehicle battery into 110 to 125 V AC at a nominal 600 W. Two standard three‑prong outlets let you run laptops, chargers or small tools from a car, truck or boat electrical system.

Aluminum Case Handles Heat Without a Fan

The solid aluminum housing dissipates heat passively so the unit runs silently during normal loads up to 600 W. Peak capacity reaches 1 200 W for brief surges, and the hardwired DC connection keeps voltage drop low under continuous draw.

Hardwired DC Input With Included Battery Clips

Supply leads must be routed to the battery or a fused distribution block; the two supplied clips provide a temporary connection for portable use. The compact 4.25 by 7 by 2.5625 in footprint fits under seats or in tool compartments, leaving dashboard outlets free for other accessories.

Highlights

  • Delivers 600 W continuous AC power from a 10.5–15 V DC source
  • Handles 1 200 W peak surges for motor start-up loads
  • Two standard 3-prong outlets let you run multiple devices
  • Rugged aluminium case dissipates heat in tight spaces
  • Includes two battery clips for quick 12 V connection

Specifications

BrandWestward

Questions about this item

How do I connect the 45NC48 inverter to a battery and what step do people often miss?

Connect the included battery clips to the hardwired DC leads, matching positive to positive and negative to negative, then attach to a 10.5 to 15V DC source; the step often missed is tightening the clip bolts fully so vibration does not loosen the connection.

What maintenance or replacement will the 45NC48 inverter need over time?

The aluminum case and hardwired leads are maintenance-free; only the two battery clips may need replacement if the spring tension weakens or the jaws corrode from repeated connection cycles.

What limit appears first when the 45NC48 inverter runs continuously at full load?

The 600 W nominal output rating is the first limit; sustained draw above that level will trigger the inverter’s protection circuit even though the peak rating reaches 1,200 W for short bursts.

More in Machine Shop Hardware

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.