We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Westward 6XZ88 replacement pipe die, alloy steel, NPT threading

Westward

Westward 6XZ88 Replacement Pipe Die NPT 1 1/4 in 11 1/2 TPI

SKU CH-82H4-NGQGH MPN 6XZ88

Replacement pipe die cuts 11 1/2 TPI NPT threads on galvanised steel and iron pipe for handheld threaders

  • TypeDrain Components
  • Cuts clean NPT threads with 11 1/2 TPI precision
  • Four alloy-steel dies share the load for longer life
  • Right-hand thread direction matches standard pipe fittings
  • Works with Westward 4YR89 die head on handheld threaders
  • Built for galvanised steel and iron pipe applications

Replacement pipe die for NPT threads

This Westward 6XZ88 die cuts National Pipe Taper threads on galvanised steel or iron pipe. It fits 1 1/4 inch pipe and works with right-hand thread direction. The die is designed for use with Westward handheld manual and power threaders.

Practical limits of the NPT interface

The die produces 11 1/2 threads per inch, which is the fixed pitch for this pipe size under the NPT standard. It cannot cut other thread forms or pitches, so the installer must confirm the required thread specification before use.

Four-die alloy-steel set decides fit

The set contains four alloy-steel dies that mount in the compatible Westward die head (Grainger part 4YR89). If the threader uses a different die head, this set will not fit and cannot be used.

Highlights

  • Cuts clean NPT threads with 11 1/2 TPI precision
  • Four alloy-steel dies share the load for longer life
  • Right-hand thread direction matches standard pipe fittings
  • Works with Westward 4YR89 die head on handheld threaders
  • Built for galvanised steel and iron pipe applications

Specifications

TypeDrain Components
BrandWestward
Model6XZ88

Questions about this item

Should I choose the 1 1/4 in NPT die or a different size for my pipe?

Select the 1 1/4 in NPT die when threading 1 1/4 in galvanized steel or iron pipe; the 11 1/2 TPI pitch matches the NPT standard for that diameter.

What does the 11 1/2 TPI figure mean once the die is in my threader?

It means each inch of thread cut on the pipe will have 11 1/2 threads, producing the correct National Pipe Taper profile for a pressure-tight seal.

Will this die work with my handheld threader and what does the 4YR89 compatibility cap?

The die fits Westward handheld manual and power threaders using the 4YR89 die head; it is limited to right-hand NPT threads on 1 1/4 in pipe.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.