Westward
Westward 5PXH1 Pipe Tap 1/8"-27 NPT Semi-Bottoming 4 Flutes
Cuts 1/8"-27 NPT threads with a semi-bottoming design and four flutes in high-speed steel
- TypeHole, Drill, Bore & Wire Gauges
- NPT threads cut cleanly in pipe with 4-flute semi-bottoming design
- High-speed steel construction resists wear during repetitive hand tapping
- Right-hand 1/8"-27 thread fits standard pipe fittings
- 75 % thread drill size Q ensures accurate hole preparation
- Bright uncoated finish allows easy inspection of cutting edges
Westward 5PXH1 Pipe Tap 1/8"-27 NPT
This Westward 5PXH1 pipe tap cuts NPT threads in pipe and conduit fittings. The semi-bottoming design with four flutes produces clean threads in a single pass. Right-hand threading follows standard plumbing practice. High-speed steel construction resists wear during repeated use.
Suited for plumbers and mechanics threading 1/8
Workers who need taper pipe threads for pressure-tight seals will find this tool effective. Buyers requiring larger diameters or different thread standards must select another tap. The fixed 1/8"-27 specification limits use to that size only.
1/8"-27 NPT thread size
The 27 threads-per-inch pitch and NPT taper profile determine compatibility with matching fittings. Four flutes balance chip clearance and thread finish for this diameter. Semi-bottoming chamfer allows threading closer to the bottom of blind holes.
Highlights
- NPT threads cut cleanly in pipe with 4-flute semi-bottoming design
- High-speed steel construction resists wear during repetitive hand tapping
- Right-hand 1/8"-27 thread fits standard pipe fittings
- 75 % thread drill size Q ensures accurate hole preparation
- Bright uncoated finish allows easy inspection of cutting edges
Specifications
| Brand | Westward |
|---|---|
| Type | Hole, Drill, Bore & Wire Gauges |
Questions about this item
Will the 4-flute high-speed steel tap need resharpening or replacement after repeated 1/8"-27 NPT threading jobs?
The high-speed steel construction resists wear during pipe threading; resharpen or replace the tap when the cutting edges dull or chip from extended use.
What limit appears first when running this 1/8"-27 NPT tap continuously through multiple holes?
Chip evacuation in the 4-flute design becomes the limiting factor during sustained threading; clear chips regularly to maintain cutting performance.
How much heat and noise does this bright uncoated tap generate during all-day pipe threading?
The bright uncoated high-speed steel produces moderate heat and typical metal-cutting noise; use cutting fluid to reduce temperature and extend tool life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
