Westward
Westward 54PR41 Crowfoot Socket Wrench 13/16 in
A 13/16-inch crowfoot socket wrench made from alloy steel with a 3/8-inch drive for tight access
- Typesocket
- Alloy steel construction for lasting strength
- Chrome finish resists corrosion and wear
- 3/8 in drive fits standard ratchets
- 13/16 in head targets large fasteners
- 2 in overall length reaches tight spots
13/16" Crowfoot Socket Wrench
The Westward 54PR41 crowfoot socket wrench fits a 3/8" drive and engages fasteners with a 13/16" head. It is built from alloy steel with a chrome finish for corrosion resistance. The tool measures 2" in overall length and 40 5/8" in overall width. Mechanics and technicians use it to reach bolts in tight or obstructed spaces where a standard socket cannot fit.
Sustained Torque Application
Alloy steel construction allows the wrench to handle repeated tightening cycles without rounding the head or deforming the drive tang. The chrome plating resists rust during long jobs in damp environments. Because the tool is non-insulated and non-magnetic, it behaves predictably around electrical components and ferrous debris. Users should apply force smoothly to avoid sudden loading on the crowfoot geometry.
Pre-Installation Checks
Verify that your ratchet or breaker bar accepts a 3/8" drive before ordering. Confirm the fastener requires a 13/16" hex size and that the 40 5/8" overall width clears surrounding obstacles. The product carries a Proposition 65 warning for cancer and reproductive harm; review local safety requirements. Ensure the application does not demand insulated or non-sparking tools.
Highlights
- Alloy steel construction for lasting strength
- Chrome finish resists corrosion and wear
- 3/8 in drive fits standard ratchets
- 13/16 in head targets large fasteners
- 2 in overall length reaches tight spots
Specifications
| Brand | WESTWARD |
|---|---|
| Type | socket |
Questions about this item
How much heat does the 13/16 in crowfoot generate during all-day use?
As a passive hand tool, the alloy steel 13/16 in crowfoot produces no heat of its own; any warmth comes from the fastener or the ratchet you turn it with.
What drive-size ratchet or breaker bar must I already own to use this 3/8 in drive crowfoot?
You need a 3/8 in square-drive ratchet, breaker bar or torque wrench; the crowfoot’s 3/8 in drive fits directly onto that square drive.
Will the 13/16 in head clear the same bolts my older 3/8 in drive sockets fit?
Yes — the 13/16 in head engages the same fastener size, while the 3/8 in drive matches your existing ratchets, so it works alongside older sockets without adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
